Datex Ohmeda Modulus SE Features
The Datex Ohmeda Modulus SE Anesthesia Machine Provides a set of medical gasses for a breathing system. The Modulus SE can be equipped with either the 7800 ventilator or the 7900 Ventilator. The System offers a large selection of gases, vaporizers, ventilators, and monitors that allow you to configure the system for what is needed for each situation. The Modulus SE anesthesia Machine Comes with 3 standard drawers and an overhead shelf for storage.
- Ascending bellows ventilator (7800 or SmartVent 7900). Modes CMV, PCV (withSmartVent), Manual/Spontaneous.
- Mechanical/pneumatic flowmeters (needle valves and glass flowtubes) and vaporizers.
- Traditional size, configuration of absorber head, and higher-volume breathing circuit. Loose absorbent granules or canisters.
- Removable vaporizers. Can be used with non-rebreathing circuits. Opened or closed scavenger interface.
- Montering Included: Volume Pressure and Oxygen Inspired.
Datex Ohmeda Modulus SE Specification
Dimensions
- Height: 170 cm (66.9”)
- Depth: 79.4 cm (31”)
- Width: 79.4 cm (31”)
- weight: 139.3 kg (309.5 lbs)
Drawers and Shelf
- Drawer: 47.6 x 34.3 x 14 cm (18.8” x 13.5” x 5.5”)
- Fixed Shelf: 47.6 x 36.8 cm (18.8” x 14.5”)
- Slide Shelf: 46.5 x 36.8 cm (18.3” x 14.5”)
Absorber and Post
- Absorber Arm Length: 30.5 cm (12”)
- Vertical Adj (above floor): 39.4 to 71.1 cm (15.5” to 28”)
Refurbished of The GE Datex Ohmeda Modulus SE Anesthesia Machine
Soma Tech Intl offers the GE Datex Ohmeda Modulus SE Anesthesia Machines up to 50% below OEM prices with the same service and warranty as new. The Datex Ohmeda Modulus SE is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Datex Ohmeda Modulus SE, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on anesthesia machines. If necessary, parts are replaced to make sure that all aspects of the Datex Ohmeda Modulus SE are to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Datex Ohmeda Modulus SE is working like new it undergoes a special cosmetic restoration process. The Datex Ohmeda Modulus SE is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Datex Ohmeda Modulus SE is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Datex Ohmeda Modulus SE anesthesia machines contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is actively looking to purchase a Datex Ohmeda Modulus SE If you or your facility is looking to sell your Datex Ohmeda Modulus SE, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Datex Ohmeda Modulus SE takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
