Ethicon G110 Features
- Utilizes ultrasonic energy to enable hemostatic cutting and/or coagulation of tissue
- The system includes an Ultrasonic Generator, a foot switch, and a handpiece
- Indicated for incising tissue when bleeding control and minimal thermal injury are desired
- Offers greater precision in tight spaces near vital structures
Ethicon G110 Specifications
Generator
- Frequency: 55.5 kHz (output)
- Dimensions: 14” Wide x 8” High x 12” Deep. Weight: Approximately 20 lbs
- Power Requirement: 115 VAC, 60 Hz, 2 Amps, 230 Watts max
- Fusing: Two, 3 AG Slow Blow 1/4” x 1 1/4”, 2 Amps, located in the power entry module. Three, internal, 5 mm x 20 mm Slow Blow, 1@ 1 Amp, 1 @ 0.25 Amps, and 1 @ 1.6 Amps
- Air Pressure: 6 psi Max
- Air Flow: Approximately 20 liters per minute
- Ventilation: At least 2” in the rear of the unit and the bottom vents should not be obstructed
Hand Piece
- Dimensions: Length: handpiece: 7”; cable: 10’. Weight: 6 ounces
- Connectors: Electric – 7 pins. Air – 1/4” CPC
- Sterilization: Steam or EtO
Foot Switch
- Switch: Dual SPST, Normally Off
- Voltage: 12 Volts maximum at .010 Amps
- Cable: 3 conductors, shielded
- Power Cord: 15 foot, 3 conductors, 16 AWG, Grounded hospital grade power cord, terminated with IEC 320 connector
Refurbished Ethicon G110 Harmonic Scalpel
Soma Tech Intl offers a Refurbished Ethicon G110 Harmonic Scalpel System up to 50% below OEM prices with the same service and warranty as new. The Ethicon System is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts the Ethicon G110 Harmonic Scalpel is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on Ethicon G110 Harmonic Scalpel. If necessary, parts are replaced to make sure that all aspects of the scalpel are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Ethicon G110 Harmonic Scalpel System is working like new it undergoes a special cosmetic restoration process. The Ethicon G110 Harmonic Scalpel is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Ethicon G110 Harmonic Scalpel is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Ethicon G110 Harmonic Scalpel contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Technology, Inc. is also actively looking to purchase an Ethicon G110 Harmonic Scalpel System. If you or your facility is looking to sell your Ethicon G110 Harmonic Scalpel, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Ethicon G110 Harmonic Scalpel to Soma Tech takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Tech is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
