Zoll Base Powercharger 4×4 Battery Charger

Zoll Base Powercharger 4×4 Features

The Zoll Base Powercharger 4×4 is a Zoll battery charging and testing system. The Zoll Powercharger 4×4 provides up to four battery charging and testing compartments, allowing for you to test up to 4 at once. The Zoll battery charger comes in either an AutoTest mode or a QuickCharge mode. The Autotest mode will automatically test the battery each time a battery is charged and will indicate when a battery is fully charged. The QuickCharge takes only 4 hours to fully charge but does not provide any information on the battery capacity. The Zoll Base Powercharger 4×4 can test or charge batteries for Zoll modules; M Series, E Series, PD 1400, PD 1600, PD 2000, smart, smart Ready, and XL battery packs.

• Automatically tests and recharges a battery rapidly in eight hours or less
• Uses visual and audible indicators to alert users to batteries with insufficient capacity, incomplete charge, and detected faults to ensure safe and reliable
• Is equipped with automated testing to save technician time and cost by eliminating manual procedures and preventing battery problems before they occur
• Includes Zoll 4 Bay Station Charger, A/C Power Cord

Zoll Base Powercharger 4×4 Specifications

Dimensions

• Height: 4.2 in
• Width: 13.2 in
• length: 12.2 in
• Weight: 4.1kg ( 9 lb) without batteries

Power

• Power Requirements: 100-120 VAC, 50/60 Hz input. 220-240 VAC, 50/60 Hz input.
• Power Consumption: 100 watts Maximum

Recharge Time

• • QuickChargetotal recharge of a fully depleted battery
  • 4 hours or less for the PD 4410/Smart/ Smart Ready Battery.
  • 8 hours or less for all XL Batteries.

Auto Test AutoTest and total recharge of fully depleted Battery

• 8 hours or less for the PD 4410/Smart/ Smart Ready Battery
• 15 hours or less for all XL Batteries

Temperature

• 5 °C to 40 °C (operating)
• 15°C to 35°C (optimal battery charging)
• -40°C to 70°C (storage and transportation)

Humidity

• 5% to 95% (relative humidity – non-condensing)

External Fuses

• 2 Type T, 2A/250V Time Delay fuses located above AC mains input.