Abbott Plum XLD

Download the specifications (PDF)

Infusion Pump

• Features:
  Macro Mode
  Micro Mode
  

  Specifications

  Dimensions ~ 8.25”h x 7.5”w x 8.75”d (including pole clamp)
  Weight ~ 7.75 lbs (with battery)
  Casing High-impact plastic
  Power Requirements 100-130 Vac, 50 to 60 Hz, less than 35 W
  Fuses 0.5 A, 250 V. slo-blo
  Battery Sealed lead-acid rechargeable 8 V battery, internal to infusion system.
  Battery Operation A fully charged new battery will provide eight hours of operation at 125 ml/hr, or 1000 ml total volume delivered, whichever occurs first.
  Recharge The battery charges whenever the infusion system is connected to AC (mains) power. If the infusion system is operating at 125 ml/hr, a full recharge takes approximately 16 hours. If the infusion system is turned to OFF/CHARGE, recharge takes approximately eight hours.

  Delivery Rate Range
  Micro Mode .1 to 99.9 ml/hr
  Macro Mode 1 to 999 ml/hr (in 1 ml increments)
  KVO 1 ml/hr
  Dose Limit Range 1 to 9999 ml/hr (in 1 ml increments)
  Occlusion Range 10 psig (+5, -2 psig)
  

*Soma Technology, Inc. acknowledges all registered trademarks of manufactures' listed. The technical data given in this publication are for general information and is subject to change without notice.