EZ-EM CT Injectors Features
The Empower CT Injector System is an advanced injection system used for the vascular (IV) administration of contrast media, in conjunction with diagnostic CT (“CAT”) scanning. The EZ EM display and controls are integrated into a separate swivel-mounted pod, unlike all other injector systems, which means that no matter how the injector head is positioned, the display and controls are always readily visible and close at hand. The injector head is free of controls and can be pivoted 180 degrees.
Because of the large illuminated indicator, the clinician is able to view it regardless of the orientation of the injector head. The unit is smaller and its appearance is less intimidating. Cuts down diagnosis time because the technician is not running in and out of the room.
EZEM Empower Ct Injector Specifications
Injector
- Height: including floor stand 39.75 in
- Width: including floor stand 26.5 in
- Weight: 18 lbs
- Voltage Rating: 100-240 V~, 150VA, 50/60 Hz, with an external switching power supply that auto-seeks to the applied voltage.
- Wattage: 150 Watts, maximum
Remote Control Computer
- Height: including mounting 16 in
- Depth: 7 in
- width of Monitor: 15.25 in
- Weight:1o lbs
- Screen width: 15 in
- Screen height: 11.5 in
- Screen Resolution: 1024 x 768
- Voltage Rating: 100-240 V~, 150 VA, 50/60 Hz, with an external switching power supply that auto-sees to the applied voltage
- Wattage: 65 watts, Maximum
- Device Ports: keyboard & mouse
- I/O Ports: USB, Serial, Ethernet, Parallel
- Media: Internal HDD
Volume
- Range: 1 to 200 mi in user-specified increments of 1 mil
- Accuracy: +/- 2% of Programmed Volume + 1ml
Pressure
- Range: 40 to 300 psi in user-specified increments of 1 psi
- Accuracy
- +/- 10% of programmed pressure limit + 10 psi, under conditions of stable pressure-limiting control.
- +/- 10% of programmed pressure limit + 75 psi for no more
then 3 seconds, for transient pressure deviations resulting from
hard occlusions or abrupt phase transitions.
Flow Rate
- Range: 0.1 to 10.0 ml/sec in user-specific ed increments of 0.1 ml/sec.
When accelerating or decelerating between two flow rates that
are different by more than 2.5 ml/sec (with a stopped condition
treated as 0 ml/sec), the flow rate will uniformly change under
program control to its new rate within three seconds. - Accuracy: +/- 5% of programmed rate + 0.1 ml/sec, under conditions of
stable flow rate control for at least 3 seconds.
+5% of programmed rate + 0.1 ml/sec, maximum
instantaneous flow rate.
Refurbished of The EZ-EM CT Injector
Soma Tech Intl offers the EZ-EM CT Injector up to 50% below OEM prices with the same service and warranty as new. The Empower injector is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the injector System, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on patient injectors. If necessary, parts are replaced to make sure that all aspects of the EZ-EM are to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Balloon Pump is working like new it undergoes a special cosmetic restoration process. The EZ EM injector is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the injector system is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished EZ-EM CT injector contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is actively looking to purchase an EZ-EM CT injector If you or your facility is looking to sell your Empower injector system, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Empower EZ-EM CT Injector takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
