Medrad Stellant Injectors Features
The Medrad Stellant injection system with Certegra Workstation delivers new levels of efficiency and patient-centered care in CT imaging. An integral part of Bayer’s CT imaging solution, the Medrad Injector has a scalable informatics-ready solution that offers radiation dose management and Contrast Dose Management options complete with injector interfacing between the scanner, PACS, RIS, and speech recognition systems. With the support of CT solution with VirtualCare Remote Support and flexible support service programs to meet the changing needs.
Enhanced Protocol Management and Precision Timing
Our workflow-centralized interface gives technologists point-of-care tools to efficiently manage injection protocols for enhanced visualization in complex CT angiography and cardiac CT studies.
Enhanced Protocol Management
- Storage and recall of up to 250 protocols.
- Designed for complex CTA and Cardiac CT protocols.
- Creates a tight contrast bolus.
- Enables precisely timed contrast delivery.
- Ability to add Certegra P3T 2.0 technology to drive personalized patient protocol standardization through new capabilities, including presets for radiologist-preferred protocols and the ability to save and recall P3T software protocols.
Dual Syringe Utilization Benefits
Uniform Enhancement
Clinical benefits of injecting contrast and saline at different ratios to visualize the whole heart. Clinical research has shown that simultaneous injection of contrast and saline, in user-selected ratios, can.
- Provide more uniform attenuation of the right and left ventricles.
- Minimize artifacts by achieving proper attenuation levels.
- Visualize the right coronary arteries and right ventricles in a single study by achieving more uniform attenuation.
Medrad Stellant Specifications
Injection Specifications
- Flow Rate: 0.1 to 10 mL/sec on 0.1 mL increments
- Volume: 1 mL to syringe capacity in 1 mL increments
- Programmable Pressure Limit: 200 mL syringe: 325 psi, 2241 kPa
- Scan Delay: 0-300 seconds (5 minutes) in 1-second increments
- Pause: 1-900 seconds (15 minutes) in 1-second increments
- Hold: Maximum HOLD time is 20 minutes
- Syringes (Volume Capacity): 200 mL sterile disposable syringe
- Maximum Number of Phases: 6
- Maximum Number of Protocols: 250
General Specifications
- Electrical Requirements: 100-240 VAC, 50/60 Hz, 300 Volts-AMPs
- Syringe Heat Maintainer Range: 95 degrees F ± 9 degrees; 35 degrees C ± 5 degrees
- Head Mounting Options: Overhead Counterpoise System of Floor Pedestal (Floor Pedestal includes an Integral IV Pole)
- DualFlow: Simultaneous Injection of Contrast and Saline
- Medrad XDS Extravasation Detection System: Extravasation Detector; Extravasation Detector Device
- Certegra P3T Cardiac Application: Patient-specific Injection Protocols for Cardiac CTA
- Certegra P3T Abdomen Application: Abdominal Protocol Optimization Software
- Certegra P3T PA Application: Pulmonary Angiography Protocol Optimization Software
Mechanical Specifications
Dual Injector Head
- Height: 6.1″ (15.5 cm)
- Width: 12.1″ (30.7 cm)
- Depth: 14.5″ (36.8 cm)
- Weight: 17.9 lb (8.1 kg) (Without Syringe)
Base Unit
- Height: 11.5″ (29.2 cm)
- Width: 11.0″ (27.9 cm)
- Depth: 8.8″ (22.2 cm)
- Weight: 13.6 lb (6.2 kg)
Certegra Workstation (CWS)
- Height: 13.5″ (34.2 cm)
- Width: 15.8″ (40.0 cm)
- Depth: 10.2″ (30.0 cm)
- Weight: 17.6 lb (8.0 kg)
Refurbished Medrad Stellant Injectors
Soma Tech Intl offers Medrad Stellant Injectors up to 50% below OEM prices with the same service and warranty as new. The Medrad Stellant Injector is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Medrad, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on injectors. If necessary, parts are replaced to make sure that all aspects of the injector are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Medrad Stellant Injector is working like new it undergoes a special cosmetic restoration process. The Medrad Stellant Injector is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Medrad Stellant Injector is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Medrad Stellant Injector contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Medrad Stellant Injector. If you or your facility is looking to sell your Medrad Stellant Injector, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Medrad Stellant Injectors to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
