Valleylab Force 1C Features
The Force 1C generator features a compact design suitable for the requirements for outpatient and office-based surgery, and the performance requirements for a full range of inpatient general surgery applications.
- Outpatient procedures to full-range surgical applications
- Monopolar and Bipolar outputs
- Audible and visual alarms
Valleylab Force 1C Specifications
Dimensions
- Dimensions: 6 × 11 × 17 inches (15 × 28 × 43 cm)
- Weight: 5 lbs (6.8 kg)
Output Waveform
- Cut: 516 kHz sinusoid
- Blend 1: 516 kHz of sinusoid at 70% duty cycle recurring at 31 kHz
- Blend 2: 516 kHz bursts of sinusoid at 45% duty cycle recurring at 31 kHz
- Blend 3: 516 kHz bursts of sinusoid at 20% duty cycle recurring at 31 kHz
- Coag: 516 kHz damped sinusoidal bursts with a repetition frequency of 31 kHz
- Micropolar: 516 kHz sinusoid, unmodulated
Output Characteristic
- Cut: 2400 Max. (open circuit) P-P voltage; 300 Rated Load ohms; 200 Nominal Power at rated load watts; 1.8 @ 100 W Crest Factor at rated load typical
- Blend 1: 2800 Max. (open circuit) P-P voltage; 300 Rated Load ohms; 175 Nominal Power at rated load watts; 2.7 @ 100 W Crest Factor at rated load typical
- Blend 2: 3200 Max. (open circuit) P-P voltage; 300 Rated Load ohms; 150 Nominal Power at rated load watts; 3.3 @ 100 W Crest Factor at rated load typical
- Blend 3: 3600 Max. (open circuit) P-P voltage; 300 Rated Load ohms; 125 Nominal Power at rated load watts; 4.6 @ 100 W Crest Factor at rated load typical
- Coag: 5200 Max. (open circuit) P-P voltage; 300 Rated Load ohms; 75 Nominal Power at rated load watts; 8.0 @ 50 W Crest Factor at rated load typical
- Micropolar: 900 Max. (open circuit) P-P voltage; 100 Rated Load ohms; 50 Nominal Power at rated load watts; 1.8 @ 40 W Crest Factor at rated load typical
Power
- (Max. operating range: 85-135 or 170-270 VAC; Nominal operating range: 110-120 or 220-240 VAC)
- Idle: 0.5 A Max. Current; 60 W Max. Power
- Cut: 5.0 A Max. Current; 600 W Max. Power
- Coag: 3.0 A Max. Current; 400 W Max. Power
- Micropolar: 2.0 A Max. Current; 180 W Max. Power
Line Regulation
- Between 85-135 volts or 170-270 volts input, output power into nominal load will vary no more than 20% or 5 watt, whichever is greater
REM Contact Quality Mon.
- Measurement frequency: 140 kHz ± 20 kHz. Measurement current: 3.0mA, maximum
Low-Frequency Leakage
- Source current nominal polarity, intact chassis ground: <10 µA, ground open: <50 µA. Source current reverse polarity, ground open: <50 µA. sink current, 135 VAC applied, all inputs: <20 µ A. Chassis source current, ground open: <100 µA
Low-Frequency Leakage
- Source current nominal polarity, intact chassis ground: <10 µA, ground open: <50 µA. Source current reverse polarity, ground open: <50 µA. sink current, 135 VAC applied, all inputs: <20 µ A. Chassis source current, ground open: <100 µA
- Micropolar RF leakage current: <150 mA. Monopolar RF leakage current: <150 mA
Refurbished Valleylab Force 1c Electrosurgical Units
Soma Technology, Inc. offers Refurbished Valleylab Force 1C Electrosurgical Units up to 50% below OEM prices with the same service and warranty as new. The Valleylab Force 1C Electrosurgical Units is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Valleylab Force 1C Electrosurgical Units is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on Valleylab Force 1C Electrosurgical Units. If necessary, parts are replaced to make sure that all aspects of the pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Valleylab system is working like new it undergoes a special cosmetic restoration process. The Valleylab Force 1C Electrosurgical Units is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Unit functions and looks like new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Valleylab Force 1C Electrosurgical Units are labeled patient-ready and packed up for shipment, they go through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Valleylab System contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Technology, Inc. is also actively looking to purchase a Valleylab Force 1B Electrosurgical Unit. If you or your facility is looking to sell your Valleylab Force 1B Electrosurgical Units, be sure to contact Soma Technology, Inc. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Valleylab Force 1B Electrosurgical Units to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment, or looking to upgrade current equipment, contact Soma Technology’s purchasing department at [email protected] or send us a message on our Sell to Soma website.
