The Drager Narkomed GS is an anesthesia machine with a built-in monitor. The Narkomed GS features an AV2 Plus ventilator system with time cycles and volume presets with pressure limits. Along with three different vaporizer configurations. The Drager anesthesia machine can monitor the patient's breathing rate, tidal volume, respiratory flow, and respiratory limit. The Drager system is an easy-to-use system with a sizeable three-drawer cabinet, a writing try, and an auxiliary flow meter. The system can provide simultaneously deliver up to four different gases or one anesthetic agent.
AV2+ Ventilator 3 gas vaporizer configurations Battery Back-up Absorber 3-tier alarm system
Dimensions Height: 53 1/4" (135.3 cm) Width: 36" (91.4 cm) Depth: 27" (68.6 cm) Weight: 375 lbs (170 kg) Power Supply 220 / 240 or 117 Volts Oxygen Monitoring Range: 10 - 100 vol% Resolution: 1 vol% Accuracy: ± 3 vol% Airway Pressure Monitoring Range: -10 - 100 cm H2O Resolution: 1 vol% Accuracy: ± 3 cm H2O or ± 10% of reading, whichever is higher. Tidal Volume Monitoring Range: 0.2 - 50 I Resolution: 0.1 I Accuracy: 0.1% or 0.1 I whichever is higher. Ventilator Frequency: 1-99 I:E Ratio: 4:1 - 1:4.5 Inspiratory: Flow: 10 - 100 I/min Tidal Vol: 50-1500 ml More Features Four display options with integrated monitor controls: 15” or 17” high-resolution color video display and 10.4” or 15” flat panel color LCD display. Or large 17” color CRT display. User configurable display layout and colors. Support for up to 8 waveforms on screen. Support for user configurable second and third screen with a different waveform and numerical information. Anesthesia dedicated alarm system. Alarms display and adjustment page. 10-minute mini graphical trends referenced to set alarm limits. Automatic alarm limits function. Six user-configurable modes and a special cardiac bypass mode. 24-hour numerical and graphical trends. Split screen capability to show ST, spirometry loop, EEG, EP, or mini trends permanently. Four user-configurable graphical trend pages. Trend cursor in both graphical and numerical trends. Waveform snapshots to store and recall waveform samples. Help function. On-line help for menu functions. Open software and hardware architecture. Easy insertion/removal of plug-in parameter modules without interrupting other monitoring. Anesthesia care oriented user interface. Optional extended arrhythmia analysis. Connector for Datex-Ohmeda S/5™ Device Interfacing Solution. Anesthesia-specific command bar for intuitive access to the monitoring functions. Removable command bar brings monitor controls close to the user. Frame with additional module slots. Moves patient cables close to the patient. Single cable connects the Extension Frame to the s/5 anesthesia Monitor’s Central Unit. Reduces patient cable clutter. Mounts to any vertical or horizontal pole. Display Display Size: 21.1 in diagonal. Display type: Active matrix color TFT LCD. Display resolution: SVGA resolution, 800 x 600. Number of traces: up to 8. Display layout and colors: User-configurable. Integrated Command Board with direct function keys, menu keys, and ComWheel for selections and adjustments in menus. Frame Module capacity: 2+2 module slots. I/O connections: RS-232 computer serial output. 2 analog outputs. External keyboard connector. Network option: Compatible with Datex-Ohmeda Network for monitor-to-monitor communication and centralized viewing. Network and MemCard option: Activates MemCards to transfer the trended data of patient vital signs. Printing: Laser printing capabilities with serial printer supporting PCL5 language (Network and serial/parallel converter). Recorder option: Built-in three-channel thermal array recorder. Mounting options: Bed mount, wall mount, and roll stand. Power Supply Rated voltage range and frequencies: 100 to 240v ±10%, 50/60 Hz. Maximum power consumption: 140 VA. Protection class: Class I. Grounding: Hospital grade. Battery Type: Built-in NiMH battery. (2 pcs.) Capacity: Up to 1.5 h typical on full charge at 23°C. Recharging: When connected to mains power. Charging time: 10 hours to full capacity. Battery operation alarm. Indicator: Battery bar displayed on the screen. Trends Graphical: All parameters, selectable times from 30 min to 72 h. Numerical: Continuously measured parameters sampled every 5 minutes, NIBP and PCWP values updated after each measurement. Also, the marker triggers numerical trend updating. Trend cursor: In both graphical and numerical trends. Alarms Alarm system classified into three categories according to priority in critical care; color and audio tone coded. Central alarms display and adjustment page. 10 min graphical mini trends referenced to set alarm limits.
Soma Tech Intl offers Drager Narkomed GS Anesthesia Machines up to 50% below OEM prices with the same service and warranty as new. The Drager Narkomed GS is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the anesthesia machine, it is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on anesthesia machines. If necessary, parts are replaced to make sure that all aspects of the anesthesia machine are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the anesthesia machine is working like new it undergoes a special cosmetic restoration process. The Drager Narkomed GS is cleaned, minor scratches and dents are repaired, it's painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Drager Narkomed GS is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Drager Narkomed GS anesthesia machines contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Drager Narkomed GS If you or your facility is looking to sell your anesthesia machine, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Drager Narkomed GS to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Techn Intl's purchasing department at [email protected] or send us a message on our Sell to Soma website.
Soma Tech Intl offers a wide range of anesthesia machines. If you have any questions about any of our anesthesia products or need a quick quote, call 1-800-GET-SOMA and one of our knowledgeable sales representatives will help you.