Steris Amsco Evolution

Other products by Steris
Other products in Autoclaves / Sterilizers / Washers / Disinfectors

24 Hour Turn Around Time - The Fastest Turnaround for Medical Equipment

Steris Amsco Evolution Features

The difference in Evolution’s controls is obvious, even from across the room. The end results - improvements in efficiency and productivity - will be just as clear. A dramatic redesign of Evolution’s controls and displays include crystal clear, high-resolution graphics and an Ethernet-enabled PC control. With one touch, operators can begin to learn it and put the control to work.

Look forward to Evolutionary differences in your Sterile Processing Department with greater throughput, reduced downtime, and improved efficiency.

316 L stainless steel construction - chamber and jacket
Fewer welds, resulting in less metal fatigue
Fully jacketed chamber to optimize even chamber heating and minimize condensation
Manual hinged door with easy-open locking mechanism
Automated horizontal or vertical door opening with auto-stop safety feature
Steam-activated gasket to lessen the possibility of air entering the chamber
Easy access and loading
Easy-to-align loading system eliminates operator

Steris Amsco Evolution Specifications

Ease of Use

Allen-Bradley PLC control provides one touch operation at ergonomic height.

Productivity

Available in 26” x 26” for efficient sterilization of glassware, media prep and utensils with easy-to-read chamber/jacket gauges and 26” x 37.5” to provide the capacity required for handling higher volumes and accommodating large equipment such as animal cages.

Easy to Maintain

ProConnect™ Remote Monitoring System can be provided to minimize response time and maximize unscheduled downtime with secure, internet based, remote monitoring around the clock and around the globe.

Flexibility

Systems maximize efficiency by fine-tuning the specific requirements of each individual load configuration via multiple cycles with fully adjustable parameters such as; a pre-vacuum cycle, a gravity cycle and a liquid cycle.

Reliability

High quality materials and precision assembly help ensure each system will meet the demanding standards of lab operations.

Dimesnions

Chamber length: 991 mm (39”); 1245mm (49”); 1549 mm (61”)
Service Clearance: 1168 mm (46”); 1422 mm (56”); 1727 mm (68”)
Loading car clearance: 2362 mm (93”); 2616 mm (103”); 2946 mm (116”)
Wall thickness: 102 mm (4”) Max.; 102 - 203 mm (4 - 8”); 102 - 203 mm (4 - 8”)

Cycles

Twenty (20) cycles are available as a standard feature. The sterilizer is factory programmed with the following applicable sterilizing cycles including:

Gravity Cycle, Liquid Cycle, Prevacuum Cycle, Leak Test Cycle, Daily Air Removal Test (DART) Cycle, Bowie-Dick Test, Liquid Air Cool Cyc le, Effluent Decontamination Cycle

Steris Amsco Evolution Features

Cycle Descripion

Twenty (20) cycles are available as a standard feature. Sterilizer is factory-programmed with the following applicable sterilizing cycles:

Gravity Cycle, for the sterilization of heat- and moisture stable goods at 100 to 141°C (212 to 285°F), and decontamination of bagged non-biohazardous laboratory wastes. Gravity cycle utilizes the gravity air-displacement principle.
Liquid Cycle, for the sterilization of liquids and media, invented borosilicate glass or metal containers at 100 to 141°C (212 to 285°F). Liquid cycle utilizes the optimal solution cooling feature, during exhaust (cooling) phase, to control the exhaust rate.
Prevacuum Cycle for efficient, high-volume sterilization of porous, heat- and moisture-stable materials at 100 to 141°C (212 to 285°F). Prevacuum cycle utilizes a mechanical airevacuation system.
Leak Test Cycle for verification of door seal and piping system integrity. Cycle parameters are pre-programmed and fixed. The acceptable maximum leak rate is 1.0 mm Hg/minute over a 10-minute period following a fixed stabilization time.
Daily Air Removal Test (DART) Cycle for verification of effective removal of residual air in the chamber and load during testing. Test cycle determines if even and rapid steam penetration into the test load has occurred. Cycle parameters are preprogrammed and fixed.
Bowie-Dick Test is available for 121°C (250°F) prevacuum cycles.

Optional Cycles

Liquid Air Cool Cycle provides water to the jacket, and air pressure to the chamber to improve exhaust time for the liquid loads, and to reduce boil over.
Effluent Decontamination Cycle is used for the processing of contaminated biohazardous laboratory waste (BL-3 and BL-4). The condensate produced during the processing cycle is decontaminated before discharge to the floor drain. The steam is admitted through the bottom of the sterilizer chamber, and the chamber is exhausted out the top side of the vessel. During the purge and vacuum pulses, all purge and exhaust gases are vented through a 0.2-micron bacterial retentive filter. The filter housing is steam jacketed to prevent wetting of the filter membrane. Available with fast exhaust or optimal solution cooling (slow exhaust) exhaust types. User is responsible for development of process parameters. Control display screen provides a number of hours of filter use.

Questions about our Autoclaves, Sterilizers, Washers, or Disinfectors?

Soma Technology, Inc offers a wide range of autoclaves/sterilizers. If you have any questions about any of our autoclaves/sterilizers or need a quick quote, call 1-800-GET-SOMA and one of our knowledgeable sales representatives will help you.