NAI DiCOM Box CA+ Features
The NAI DiCOM box CA+ is a capture device. Cine to DICOM is a universal DICOM interface that allows users to review dynamic images and cine loops outside the normal confines of modality workstations. The NAI DiCOM Box CA+ provides Cine to DICOM real-time video acquisition and DICOM conversion from both monochrome and color video sources, capturing at least ten seconds of video data acquired at 30fps in RGB or 1K x 1K monochrome. Acquisition rates are selectable from 3.75 to 30 fps, and record modes include R wave trigger, prospective, and retrospective.
The CA+ Cine to DICOM simplifies the connectivity process and provides cine acquisition, lossless and lossy image compression, DICOM Store, Print, Performed Procedure Step, and Storage Commitment for ultrasound fluoroscopic and cardiac angiographic systems. The NAI Dicom CA+ Cine to DICOM can be fully integrated into HIS/RIS.
- DICOM Print, DICOM Store.
- Modality Worklist.
- Modality Performed Procedure Step (MPPS).
- Storage Commitment.
- Real-time video acquisition up to 10 seconds RGB color or monochrome.
- Playback review through host display or attached VGA/NTSC display.
- DICOM-compliant JPEG lossy compression or non-compressed transfer.
- Interlaced or non-interlaced video input.
NAI DiCOM Box CA+ Specifications
DiCOM Service Classes
- DICOM Print
- DICOM Store
- DICOM Modality Worklist
- Modality Performed Procedure Step Storage Commitment
- Storage Commitment
Video Input (Terminated, 75 ohms)
- Monochrome composite video on Green input
- Red, Green, Blue (RGB), and composite sync
- TTL composite or separate sync
- Nominal 525/625 lines 30/25 fps
- Interlaced or non-interlaced
- Pixel Clock Minimum: 7 MHz
- Pixel Clock Max: 40 MHz / RGB
- 120 MHz Monochrome
- Image Matrix Max: 1024 x 1024 Monochrome
- 800 x 600 RGB
- Video Output locked to the video input or VGA
Video Acquisition
- Approximately 10 seconds at 30/25fps
- 384MB video acquisition RAM
- >30, 15, 10, 7.5, 6, 5, 4, 3 fps acquisition rates
Image Review
- Configurable for image playback through host display
- Variable frame rate playback freeze frame to 30fps
Network Image Compression
- Ethernet 10/100 base T – selectable
- JPEG lossy, or uncompressed
Connectors
- Video I/O High Density DB15, Female pins
- Network: 8-pin modular jack (RJ45)
- Operator Interface Keypad; DB9, Male pins
- Host Control Input: DB9, Male pins
- Remote Capture Input: BNC, Female pins
Power Input Module
- 115-230 Volts, +/- 15% 47-63 Hz, 120 VA
- Module Height: 3.25 inches (8.25 cm)
- Width: 10.125 inches (25.72 cm)
- Depth: 14.125 inches (35.88 cm)
- Weight: 8 pounds (3.68 kg)
Keypad
- Height: 7.15 inches (18.16 cm)
- Width: 4.10 inches (10.41 cm)
- Depth: 0.95 inches (2.41 cm)
- Weight: 8 ounces, (227g)
Environmental Operating
- Temperature: + 50°F to +104°F, (+10°C +40°C)
- Barometric pressure: 700 hPa to 1060 hPa
- Relative Humidity: 5% to 80% non-condensing
Transit
- Temperature: + 14°F to +122°F, (+10°C +50°C)
- Relative Humidity: 5% to 85% non-condensing
Clearance Requirements
- 3 inches (7.6cm) for rear panel cable connection
- Do not obstruct ventilation airflow at the front and rear of the module
Agency Approvals / Classification
- UL 2601-1
- IEC601-1
- IEC601-1-2
- CSA601.1
- FCC part 15
Refurbished NAI DiCOM Box Ca+ Image Capture Device
Soma Tech Intl offers Refurbished NAI DiCOM Box Ca+ Image Capture Devices up to 50% below OEM prices with the same service and warranty as new. The NAI Image Capture Device is not only technically refurbished but also cosmetically refurbished to make it work and look new. When the refurbishing process starts on the NAI the Image Capture Device is carefully inspected and tested by our in-house biomedical engineers who are highly skilled and certified to work on Image Devices. If necessary, parts are replaced to make sure that all aspects of the Device are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the NAI DiCOM Box Ca+ Image Capture Device is working like new it undergoes a special cosmetic restoration process. The Image Capture Device is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Image Device functions and looks new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Device is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished NAI DiCOM Box Ca+ Image Capture Device contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a NAI DiCOM Box Ca+ If you or your facility is looking to sell your NAI, be sure to contact Soma Tech. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned NAI Image Capture Devices to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
