NAI DiCOM Box Ca Image Capture Device

Quotes in less than 24 hours Download Specifications

NAI DiCOM Box Ca Features

The DiCOM box Ca Video to DiCOM solution provides “off the shelf” connectivity for a variety of network applications such as Print and Archive Servers via the DiCOM 3.0 standard. The NAI DiCOM Box Ca allows the addition of network connectivity to virtually any video-based imaging system. It’s ideal for creating flexible and scalable print networks or trying various modalities into PACS, teleradiology networks, and RIS interfaces via Modality Worklist.

  • DiCOM Print, DiCOM Store
  • Modality Worklist
  • Modality Performed Procedure Step (MPPS)
  • Storage Commitment
  • Multi-modality compatible with over 250 models
  • Host video rates up to 20MHz pixel rate
  • High-line rate configurations available
  • Interlaced or non-interlaced video input

NAI DiCOM Box Ca Specifications

DiCOM Service Classes

  • Dicom Print
  • Optional DiCOM Store
  • Optional DiCOM Modality Worklist
  • Optional DiCOM MPPS
  • Optional DiCOM Storage Commitment

Standard Video Input (Terminated, 75 ohms)

  • Monochrome composite video into Green input
  • Red, Green, Blue (RGB), and composite sync (Can be configured for sync on Green and separate sync)
  • Nominal 525/625 lines 30/25 fps
  • Interlaced or non-interlaced
  • Pixel Clock Minimum: 7 MHz
  • Pixel Clock Max: 20 MHz / Low Line Rate
  • 150 MHz High Rate

Video Acquisition

  • Up to 768 x 580, 20Mhz, 8 bit
  • Single Frame Color Capture
  • 24-bit color (16,777,216 colors)

Internal Storage Network Connectors

  • 2.2GB or greater Hard Drive
  • Ethernet 10/100 base T – selectable
  • Video I/O High Density DB15, Female pins
  • Network: 8-pin modular jack (RJ45)
  • Operator Interface Keypad; DB9, Male pins
  • Host Control Input: DB9, Male pins
  • Remote Capture Input: BNC, Female pins

Power Input Module

  • 115-230 Volts, +/- 15% 47-63 Hz, 120 VA
  • Height: 3.25 inches (8.25 cm)
  • Width: 10.125 inches (25.72 cm)
  • Depth: 14.125 inches (35.88 cm)
  • Weight: 8 pounds (3.68 kg)

Keypad

  • Height: 7.15 inches (18.16 cm)
  • Width: 4.10 inches (10.41 cm)
  • Depth: 0.95 inches (2.41 cm)
  • Weight: 8 ounces, (227g)

Environmental Operating

  • Temperature: + 50°F to +104°F, (+10°C +40°C)
  • Barometric pressure: 700 hPa to 1060 hPa
  • Relative Humidity: 5% to 80% non-condensing

Transit

  • Temperature: + 14°F to +122°F, (+10°C +50°C)
  • Relative Humidity: 5% to 85% non-condensing

Clearance Requirements

  • 3 inches (7.6cm) for rear panel cable connection
  • Do not obstruct ventilation airflow at the front and rear of the module

Classification

  • IEC601 Class I
  • Type B ordinary equipment
  • Continuous operation

Agency Approvals

  • UL 60601-1
  • CAN/CSA C22.2 NO. 601.1-M90
  • EN 60601-1-2 Class B Group 1
  • FCC part 15

Optional High Line Video Input

  • 150 MHz / High Line Rate Image
  • Image Matrix Max: 2048 x 1024

Optional High Line Capture

  • Up to 2048 x 1024, 150MHz, 8-bit mono, 24 bit color

Refurbished NAI DiCOM Box Ca Image Capture Device

Soma Tech Intl offers Refurbished NAI DiCOM Box Ca Image Capture Devices up to 50% below OEM prices with the same service and warranty as new. The NAI Image Capture Device is not only technically refurbished but also cosmetically refurbished to make it work and look new. When the refurbishing process starts on the NAI the Image Capture Device is carefully inspected and tested by our in-house biomedical engineers who are highly skilled and certified to work on Image Devices. If necessary, parts are replaced to make sure that all aspects of the Device are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the NAI DiCOM Box Ca Image Capture Device is working like new it undergoes a special cosmetic restoration process. The Image Capture Device is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Image Device functions and looks new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Device is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished NAI DiCOM Box Ca Image Capture Device contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a NAI DiCOM Box Ca If you or your facility is looking to sell your NAI, be sure to contact Soma Tech. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned NAI Image Capture Devices to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!

Banner

Questions about our Capture Devices?

Soma Tech Intl offers a wide range of  Medical Capture Devices. If you have any questions about any of our capture devices or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your medical capture device? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us