Gaymar Medi-Therm III – Hyper / Hypothermia Machines
Quotes in less than 24 hours
Download Specifications
Gaymar Medi-Therm III Features
The Gaymar Medi-Therm III is a hyper/hypothermia system that helps control the patients’ temperature. The Medi-Therm III has two separate heating and cooling reservoirs to help deliver either a heated solution or a cooled solution to the patient when needed. The desired temperature of the water is circulated through tubing in a blanket. The system is continuously checking the temperature of the water against the temperature of the patient to achieve the desired correct temperature. The Gaymar Medi-Therm features 2 modes; a manual mode and an automatic mode with a microprocessor that creates a more precise and accurate reading.
- Actively warming patients that have hypothermic symptoms.
- Noninvasive, catheter-free warming system.
- Dual reservoir for warming and cooling.
- Can be used on neonates through older adults.
- Can effectively cool intracranial and cardiac surgery patients.
Gaymar Medi-Therm III Specifications
Dimensions
- Height: 37″ (94 cm)
- Width: 14″ (35.6 cm)
- Depth: 18.25 (46.4 cm)
- Weight (Full): 141 lb (64 kg)
- Weight (Empty): 121 lb (54.9 kg)
Power
- Volts: 120 V AC
- Amps: 11.5 Amps
- Hertz: 60 Hz
- 500 Watt heater
- 1/3 hp refrigeration system
Temperature Control
- Blanket Range: 39.2 to 107.6 °F (4 to 42°C)
- Patient Range (Auto): 86 to 105.8 °F (30 to 41°C)
- Heating Rate: 3.2 °F/min (1.8°C/min)
- Cooling Rate: 3.4 °F/min (1.9°C/min)
Refrigerant
- R-134a (Freon free)
Control
- Microprocessor
- Sealed front panel
- Self-compensating temperature measurement
- no periodic calibration required
Fluid System
- Distilled Water: 2.5 Gallons
- Separate hot and cold reservoirs
- Magnetically coupled pump
- 16 gph flow rate minimum with the blanket
Cabinet
- Shell: 0.63 thick aluminum chassis
- 16 Ga Steel top: flame retardant
- ABS: 5″ conductive casters
Refurbished Gaymar Medi-Therm III Hyper/Hypothermia System
Soma Tech Intl offers the Gaymar Medi-Therm III up to 50% below OEM prices with the same service and warranty as new. The hyper/hypothermia system is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Medi-Therm III, it is carefully inspected and tested by our in-house biomedical engineers, that are highly skilled and certified to work on hyper/hypothermia machines. If necessary, parts are replaced to make sure that all aspects of the unit are back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Gaymar Medi-Therm is working like new, it undergoes a special cosmetic restoration process. The hyper/hypothermia system is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment they sell. Before the Medi-Therm hyper/hypothermia machine is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished hyper/hypothermia machines, contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is actively looking to purchase a Gaymar Medi-Therm III hyper/hypothermia machine. If you or your facility are looking to sell your Gaymar Medi-Therm system, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Gaymar Medi-Therm III takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Tech Intl’s purchasing department at [email protected] or send us a message on our Sell to Soma website.
