Hospira Plum XL3 Infusion Pump

click on thumbnail to zoom

Other products by Abbott
Other products in Infusion Pumps

24 Hour Turn Around Time - The Fastest Turnaround for Medical Equipment

Hospira Plum XL3 Features

The Plum® XL3 Micro/Macro is a multi-line volumetric infusion system designed to meet the growing demand for hospital-wide standardization. The Plum XL3 houses three independent pumping units, each having a primary line, secondary line, and piggyback fluid delivery capability. The Plum XL3 is suited for a wide range of medical/surgical and critical care applications. Full compatibility with LifeCare® PlumSets® administration sets and accessories and the LifeShield® needleless protection systems make the Plum XL3 a convenient and cost-effective infusion system.

Three independently programmable pumps
For primary fluids delivery
Functional will all types of containers
Automatically traps and eliminates air

Hospira Plum XL3 Specifications

Dimensions

Height: 13.75 in
Width: 12.2 in
Depth: 7.5 in (excluding pole clamp)
Weight: 20 lbs. (with batteries)

Electrical

Power Requirements: 100-130 VAC, 47 /63 Hz. less than 60W
Power Cord: Hospital-grade AC cord, 10 ft long
Fuses: 1.0 A, 250 V, Slow Blowing
Batteries: Rechargeable and sealed, lead-acid 8 V batteries which are internal to the device. Accessible for ease of field replacement with leads and polarized connectors.
Battery Life: The Plum XL3 is battery powered for emergency backup and temporary portable operation. It should be operated on battery power until full discharge at least once every six months for optimum battery performance and life. A fully charged battery set will provide an operating time of approximately four hours when all pumping units operate simultaneously at a rate of 125 mL/hr or a cumulative delivery of 1,000 mL at any combination of rates and pumping units.
Recharge: The batteries charge whenever the PlumXL3 Micro/Macro is connected to AC power. If the device pumping units are turned to OFF CHARGE. a recharge takes approximately six hours. A recharge takes longer if the pumping units are turned on.

Environment

Operating Temperature:10° to 40° C, 10% to 90% relative humidity

Transportation and storage Environment

Temperature: -20° to 60° C
relative Humidity: 10% to 90%
Atmospheric Pressure: 0-10,000 feet (0-3,000m) or equivalent pressure

Delivery Rate Range

Primary Mode: 0.1 to 99.9 mL/hr (in 0.1-mL increments)
Secodary Mode: 100 to 999 mL/hr (in 1 mL increments)
KVO: The lower of 1.0 mL/hr or the primary delivery rate

Dose Limit Range

Primary Mode: 0.1 to 99.9 mL (in 0.1-mL increments)
Secodray Mode: 100 to 9999 mL (in 1-mL increments)

Occlusion Range

Distal: 10 psig (+5, -2 psig)

Untitled Document

General Information About IV Therapy

IV Therapy

IV therapy is used to deliver by infusion, fluids, medication, or nutrients to patients.
There are two main types of administration of infusion, volumetric and syringe/PCA.

IV Therapy-Volumetric

These pumps are used when the accuracy of fluid volume to be infused is critical such as in the case of medications used for infusion of drugs for circulatory support.

Volumetric pumps deliver a given volume of fluid per unit time measured in mL/hour.

Volumetric pumps can be single or multi channel. Both types allow for the administration of more than one fluid at a time. Single channel employs a piggyback method while multi-channel uses separate tubing set up for the administration of multiple medications or fluids

IV Therapy-Syringe

Syringe pumps are used to administer small volumes of fluids or medications. (1 mL to 60 mL syringe)

Syringe pumps are an effective way to deliver medication with precision while reducing the chance of human error if the medication were to be administered by a member of the medical staff* (of course human error can occur when inputting data or choosing dose rate over time)

Like volumetric pumps, syringe pumps can be programmed to deliver the medication over a predetermined time

Refurbished Hospira Plum XL3 Infusion Pump

Soma Tech Intl offers Hospira Plum XL3 Infusion Pump up to 50% below OEM prices with the same service and warranty as new. Hospira Plum XL3 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the infusion pump, it is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on surgical tables. If necessary, parts are replaced to make sure that all aspects of the Hospira Plum XL3 are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Hospira Plum XL3 infusion pump is working like new it undergoes a special cosmetic restoration process. The Hospira Plum XL3 is cleaned, minor scratches and dents are repaired, it's painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Hospira Plum XL3 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Hospira Plum XL3 infusion pump contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a Hospira Plum XL3 If you or your facility is looking to sell your Hospira Plum XL3 Infusion pump /a>, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Hospira Plum XL3 to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Techn Intl's purchasing department at [email protected] or send us a message on our Sell to Soma website.

Questions about our Infusion Pumps?

Soma Technology, Inc offers a wide range of infusion pumps. If you have any questions about any of our infusion pumps or need a quick quote, call 1-800-GET-SOMA and one of our knowledgeable sales representatives will help you.