Steris Medivators CER-1 Optima

Quotes in less than 24 hours Download Specifications

Steris Medivators CER-1 Optima Features

Compact Endoscope Reprocessor designed to quickly reprocess one or two immersible endoscopes per cycle. The CER features simple, push-button operation, a large reprocessing basin for disinfecting any size endoscope (including EUS endoscopes), and a small footprint for countertop or mobile cart use. Reprocessor capabilities include a user-selectable wash cycle for endoscope cleaning, an alcohol purge port, and automated air drying of endoscope channels. A full gasket lid contains disinfectant vapors, and the CER’s unique design self-disinfects internal fluid lines during every cycle. A two-stage water filtration system reduces particulate matter and provides certified bacteria-free water for endoscope rinsing. The CER includes a heated disinfectant reservoir, water pre-filtration system, alcohol flushing tubing, accessory bag, and one set of water filters.

  • Compact, cost-effective endoscope reprocessing featuring simple, push-button operation
  • Fast cycle time for quick endoscope turnaround
  • Individual endoscope channel connections ensure disinfectant and rinse water contact with all channels
  • Pre-programmed cycles for reprocessing cycle repeatability and consistency
  • CER-1 model disinfects one endoscope per cycle
  • CER-2 model disinfects up to two endoscopes per cycle
  • The gasket lid and sealed reservoir contain disinfectant vapors
  • Alcohol flush and air drying of endoscopes
  • Audible and visual alarms for reprocessing cycle deficiency
  • Assures patient and operator safety self-disinfects internal fluid lines during every cycle
  • Bacteria retentive two-stage water filtration system
  • Compatible with all current models of endoscopes, including those with elevator wire channels
  • For use with most FDA-cleared reusable high-level disinfectants
  • A vapor management system, disinfectant transfer pump, neutralization system, and mobile cart optional

 

Steris Medivators CER-1 Optima Specifications

Dimensions

  • Chassis Dimensions (height x width x depth): 46”x36”x21” (117x91x53cm)
  • Height with lid open: 64 inches (162.5 cm)
  • Weight: 400lbs (181kg)

Operating Conditions

  • Altitude: <15,000 feet (4,572m)
  • Humidity: 20% to 80%, non-condensing
  • Temperature: 80°F ± 20° (27°C ± 10°)

Electrical Requirements

  • 230 VAC 50/60 Hz, 6A 1f
  • 120 VAC 60 Hz, 12A 1f

Water Requirements

  • Potable water from the building (cold water supply).
  • 35-40psi (2.4 – 2.75bar) at regulator.
  • Water temperature maximum: 110°F (43°C)

Capacities

  • Disinfectant reservoir: 15 liters
  • Basin: 11 liters
  • Alcohol and detergent reservoir: 800ml each

General

  • Power Cord: Hospital-grade 8 feet (2.4m)
  • Mains Supply Voltage Fluctuations: Not to exceed ±10% of the nominal voltage Installation Over Voltage Category: II
  • Classification: I, Ordinary Protection
  • Rinse Water Consumption: Approx. 10 gallons (39 liters) per cycle
  • Designed for Use: Indoor
  • Environmental Rating: Standard
  • Pollution Degree: 2
  • Mode of Operation: Continuous
  • Degree of Mobility: Stationary
  • Waste Drain: The reprocessor drain is 25 inches (60cm) above the floor. Because the reprocessor uses a gravity system there must be at least a 3-inch (25mm) drop from the reprocessor over 36 inches (30cm) for proper draining
  • Disinfectant Compatibilities: Contact your local distributor for compatible reprocessing chemicals
  • Internal Heater: Ambient temperature to 125°F (52°C)
Banner

Questions about our Endoscope Reprocessors?

Soma Tech Intl offers a wide range of endoscope reprocessors. If you have any questions about any of our endoscope reprocessors or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your endoscope reprocessors? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us