Medrad Envision CT Features
The Medrad EnVision CT Injector is an integral part of the total fluid delivery system.
The EnVision is a flow-controlled system. Using the systems display you can select a flow rate in which contrast will be delivered through the injector. The Medrad EnVision is easy to use and offers superior control of contrast as it is injected into the patient. The Medrad syringes were designed to be clean, making it easy to detect air bubbles. The Envision comes with a wide range of syringes that make it easier to find the right syringe that can meet the exact needs of the procedure and the patient.
Medrav EnVision CT injector System Specifications
Display Control Consel Dimensions
- Height: 11.875 in ( 30.2 cm
- Width: 11.5 in (29.2 cm)
- Depth: 13 in (33 cm)
- Weight: 7.9 lbs (3.6 kg)
- Weight on a pedestal: 35 lbs ( 15.9 kg)
Electronics Console Dimensions
-
- Height: 5.5 in (14 cm)
- Width: 12.313 in (31.2 cm)
Depth: 13.75 in (34.9 cm)
- Weight: 12.8 lbs ( 5.8 kg)
Injector Head and Pedestal stand dimensions
- 200 ml Qwik-Fit Syringe Width: 17.93 in (45.5 cm)
- 125 ml Qwik-Fit Syringe Width: 16.25in (41.3 cm)
- Maximum Height on stand: 48.75 in (124 cm),/li>
- Minimum Height on stand-in (91 cm)
- weight of injector head: 6.7 lbs (3.0 kg)
- Pedestal weight: 38 lbs (17.3 kg)
Electrical Requirements
- 100-240 VAAC
- 50/60 Hz
- 250 VA
Environmental
- Storage Temperature: -40°C to 70°C (-40°F to +158°F)
- Storage Humidity: 5% to 95% R. H., non-condensing
- Storage ar Pressure: 70 kPa to110 kPa
- Operating Temperature: +10°C to +40°C (+50°F to +104°F)
- Operating Humidity: 20% to 93% R.H. at +40°C, non-condensing
- Operating Air Pressure: 70 kPa to 110 kPa
Refurbished of The Medrad EnVision Injector
Soma Tech Intl offers the Medrad EnVision Injector up to 50% below OEM prices with the same service and warranty as new. The Envision is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Medrad Injector, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on injectors. If necessary, parts are replaced to make sure that all aspects of the Stryker 1089 stretcher are to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the stretcher is working like new it undergoes a special cosmetic restoration process. The Envision Injector is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the injector is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Medrad Envision Injectors contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is actively looking to purchase a Medrad EnVision injector If you or your facility is looking to sell your injectors, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Medrad Injectors takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
