Getinge Maquet Servo-S

Quotes in less than 24 hours Download Specifications

Siemens Maquet SERVO-s Features

The Getinge Maquet Servo-s ventilator features a wide range of ventilation modes that can be tailored to specific clinical situations. The Servo-s has a large intuitive user-interface that provides valuable decision-support information. This Maquet ventilator has been designed for both shelf mounting and in-hospital transport with a mobile cart. It supports invasive and non-invasive ventilation with leakage compensation for non-invasive ventilation modes for all patient types. If you’re looking for a similar model try the Servo-i ventilator.

  • Invasive and non-invasive ventilation with leakage compensation.
  • User friendly user-interface.
  • Rotary dial and direct access knobs for navigation.
  • Designed for shelf mounting or intrahospital transport with a mobile cart.
  • Quick inspiratory flow controller allows for reduced work of patient breathing.

Siemens Maquet SERVO-s Specifications

Dimensions

  • Height: 20.5” (52 cm)
  • Width: 15” (38 cm)
  • Depth: 11.8” (30 cm)
  • Weight: 44 lbs (20 kg)

Parameter Settings

  • Inspiratory tidal volume (ml): 100–2000
  • Inspiratory minute volume (l/min): 0.5–60
  • Apnea, time to alarm (s): 15–45
  • PC/PS above PEEP (cmH2O): 0–(120 – PEEP)
  • PC/PS above PEEP in NIV (cmH2O): 0–(62 – PEEP)
  • PEEP (cmH2O): 0–50
  • PEEP in NIV (cmH2O): 2–20
  • CMV frequency (breaths/min): 4–100
  • SIMV frequency (breaths/min): 1–60
  • Breath cycle time, SIMV (s): 1–15
  • PHigh (cmH20): (PEEP + 1)–50
  • THigh (s): 0.2–30
  • TPEEP (s): 0.1–10
  • O2 concentration (%): 21–100
  • I:E ratio: 1:10–4:1
  • TInsp (s): 0.1–5
  • TPause (% of breath cycle time): 0–30
  • Flow trigger sensitivity level: 0–10
  • Press. trigg sensitivity (cmH2O): -20–0
  • Insp. rise time (% of breath cycle time): 0–20
  • Insp. rise time (s): 0–0.4
  • End inspiration (% of peak flow): 1–70
  • End inspiration in NIV (% of peak flow): 10–70
  • Oxygen Breaths: 100% for 1 minute
  • Start Breath: Initiation of 1 breath (In SIMV mode initiation of 1 mandatory breath)
  • Pause Hold: Insp. or exp (0–30 seconds)

Screen

  • Type: TFT-LCD module
  • Size: 12.1” (31 cm) diagonal
  • Viewing area: 9.7” x 7.3” (24.6 x 18.5 cm)

Backup Parameter Settings

  • Inspiratory Tidal Volume (ml): 100–2000
  • PC Above PEEP (cmH2O): 5–(120 – PEEP)
  • PC above PEEP in NIV (cmH2 O): 5–(62 – PEEP)
  • CMV frequency (breaths/min): 4–100
  • I:E ratio: 1:10–4:1
  • TInsp (s): 0.1–5

Power

  • Power Supply, Automatic Range Selection: 100–120 V AC ±10%, 50–60 Hz, or 220–240 V AC ±10%, 50–60 Hz
  • External 12 V DC: 12.0 V–15.0 V DC, 10 A
  • Battery Capacity: 2 rechargeable battery modules 12 V, 5 A, 3.5 Ah each
  • Battery Backup Time: At least 1 h with 2 fully charged batteries
  • Battery Recharge Time: Approximately 3h/battery
  • Max Power Consumption: At 100–120 V: 2 A, 190 VA, 140 W; At 220–240 V: 1 A, 190 VA, 140 W

Controlled Invasive Ventilation

  • PC (Pressure Control)
  • VC (Volume Control)
  • PRVC (Pressure Regulated Volume Control)
  • Can be configured with alternative flow patterns: VC with flow adaptation; VC without flow adaptation; VC with decelerating flow

Supported Invasive Ventilation

  • PS/CPAP (Pressure Support / Continuous Positive Airway Pressure)

Combined Invasive Ventilation

  • SIMV (PC) + PS (Synchronized Intermittent Mandatory Ventilation)
  • SIMV (VC) + PS
  • SIMV (PRVC) + PS
  • Bi-Vent/APRV (Airway Pressure Release Ventilation)

Non-Invasive Ventilation

  • Leakage Compensation Level: Inspiratory, up to 200 l/min; Expiratory, up to 65 l/ min
  • Leakage Overrange Detection: Automatic
  • Disconnect Detection: Automatic
  • Disconnect flow: Low; High; Disabled; Configurable 7.5 l/min; 40 l/min;
  • Deactivates disconnect detection
  • Connect Detection: Manual, or automatic via bias flow

Refurbished Getinge Maquet Servo-S Ventilator

Soma Tech Intl offers the Getinge Maquet Servo- s ventilator up to 50% below OEM prices with the same service and warranty as new. The Servo- S is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the ventilator, it is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on ventilators. If necessary, parts are replaced to make sure that all aspects of the Maquet ventilator to the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Servo-s is working like new it undergoes a special cosmetic restoration process. The Maquet ventilation system is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Getting Siemens Maquet Servo-S ventilator is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished surgical tables contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is actively looking to purchase Maquet ventilators, If you or your facility is looking to sell your ventilator system, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Servo- S ventilator takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Tech Intl’s purchasing department at [email protected] or send us a message on our Sell to Soma website.

Banner

Questions about our ventilators?

Soma Tech Intl offers a wide range of ventilators. If you have any questions about any of our ventilators or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your ventilators? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us