Steris Amsco 600 Medium Steam
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included. Download Specifications
Steris Amsco 600 Medium Steam Sterilizer Features
The Steris Amsco 600 medium steam sterilizer meets the critical demands of maximum throughput with a minimum footprint. The Steris Amsco 600 is designed for pre-vacuum and gravity sterilization of heat and moisture-stable medical devices and their accessories in healthcare facilities. This autoclave safely sterilizes up to 375 lbs per cycle for efficient high-volume sterilization.
- Easy loading with an automated vertical door.
- No side or rear service clearance is required.
- Maximizes space with maximum throughput.
- Active pneumatic valves for long-life reliability.
- Integrated large-capacity, high-quality vacuum pump.
- Fully jacketed chamber to maximize heat distribution and reduce condensation.
- Dual Pressure and temperature sensors.
Steris Amsco 600 Medium Steam Sterilizer Specifications
Dimensions
- Height: 89.1” (226.3 cm)
- Width: 39.4” (100.1 cm)
- Depth: 51.7” (131.3 cm) or 63.4” (161 cm) or 75.3” (191.3 cm)
- Floor Space: 14.1 ft2 (1.3 m2) or 17.3 ft2 (1.6 m2) or 20.6 ft2 (1.9 m2)
Capacity
- Quantity of Wrapped Trays per Cycle: 9, 12, or 15
- Weight Per Tray: 25 lbs (11.3 kg)
- Total Weight Per Cycle: 225 lbs (102.1 kg), 300 lbs (136.1 kg), or 375 lbs (170.1 kg)
Thermal Printer
- Type: High-resolution 8 dots/mm
- Speed: 25 lines/minute
- Paper Size: 2.25” (57 mm) wide thermal paper
- Resistances: Resistant to exposure from steam, alcohol, UV and visible light, oil, heat and water
Environmental
- Pollution Degree: 2
- Installation Category (Overvoltage Category): II
- A-Weighted Sound Pressure Level: 64.24 dB
- IP (Ingress Protection): Rating = IP20
- Temperature: 50 – 104°F (10 – 40°C)
- Humidity: 60% non-condensing, maximum
- Altitude Range: 0 – 6,500 ft (0 – 1981 m)
Cycles
- Pre-programmed Cycles: 6 pre-programmed cycles
- Pre-programmed Test Cycles: 3 pre-programmed test cycles
Refurbished Steris Amsco 600 Sterilizer
Soma Tech Intl offers Steris Amsco 600 sterilizers up to 50% below OEM prices with the same service and warranty as new. The Steris Amsco 600 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Steris Amsco 600, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on sterilizers. If necessary, parts are replaced to make sure that all aspects of the Steris Amsco 600 are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Steris Amsco 600 is working like new it undergoes a special cosmetic restoration process. The Steris Amsco 600 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Steris Amsco 600 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Steris Amsco 600 sterilizers contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Steris Amsco 600. If you or your facility is looking to sell your Steris Amsco 600, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Steris Amsco 600 to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!