Valleylab Force 1B - Soma Technology, Inc.
Valleylab

Valleylab Force 1B

Add to quote
24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included. Download Specifications

Valleylab Force 1B Features

The Valleylab Force 1B is a high-power ESU that possesses high-performance capabilities in a multipurpose generator. It provides full flexibility through varying degrees of homeostasis.

  • Monopolar and Bipolar Outputs
  • Audible and Visual Arms, including REM(TM) Fault Indicator
  • REM(TM) (Return Electrode Monitoring) (Standard)
  • 300 Watts Output – Cut, 120 Watts – Coagulation, 70 watts – Biopolar

Valleylab Force 1B Specifications

Dimensions

  • Dimensions: 8 × 11 × 17 inches (15 × 28 × 3 cm)
  • Weight: 15 lbs (6.4 kg)

Output Characteristics

  • Cut: 2400 Max (open circuit) P-P Voltage, 300 Rated Load ohms, 200 Nominal Power at rated load watts, 1.8 @ 100 W Crest Factor at rated load typical
  • Blend 1: 2800 Max (open circuit) P-P Voltage, 300 Rated Load ohms, 175 Nominal Power at rated load watts, 2.7 @ 100 W Crest Factor at rated load typical
  • Blend 2: 3200 Max (open circuit) P-P Voltage, 300 Rated Load ohms, 150 Nominal Power at rated load watts, 3.3 @ 100 W Crest Factor at rated load typical

Output Waveform

  • Cut: 500 kHz Sinusoid
  • Blend 1: 500 kHz bursts, 50% Duty Cycle, 31 kHz Recurrence
  • Blend 2: 500 kHz bursts, 37.5% Duty Cycle, 31 kHz Recurrence
  • Blend 3: 500 kHz bursts, 25% Duty Cycle, 31 kHz Recurrence
  • Coag: 500 kHz bursts, 31 kHz Recurrence
  • Bipolar: 500 kHz bursts, Unmodulated Recurrence

Low-Frequency Leakage (50 / 60 Hz)

  • Normal polarity: intact chassis ground: < 10 mA, ground open; < 100 mA
  • Reverse polarity: ground open: < 100 mA. Sink current, 140V applied, all inputs; < 150 mA. Chassis source current, ground open; < 110 mA

High-Frequency Risk Parameters

  • Bipolar and Monopolar RF leakage current: < 150 milliamperes

High-Frequency Risk Parameters

  • Bipolar and Monopolar RF leakage current: < 150 milliamperes

REM Contact Quality Monitor

  • Measurement frequency: 140 kHz ± 10 kHz
  • Measurement current: 1.5 mA ± 0.5 mA

Input Power Source

  • The nominal input line voltage is 120 VAC with a full range of 85-135 VAC. The frequency line varies from 45 to 65 Hz
  • Idle: 0.5 A (Max. Current), 60 W (Max. Power)
  • Cut: 5.0 A (Max. Current), 600 W (Max. Power)
  • Coag: 3.0 A (Max. Current), 300 W (Max. Power)
  • Bipolar: 1.5 A (Max. Current), 180 W (Max. Power)

Refurbished Valleylab Force 1B Electrosurgical Units

Soma Technology, Inc. offers Refurbished Valleylab Force 1B Electrosurgical Units up to 50% below OEM prices with the same service and warranty as new. The Valleylab Force 1B Electrosurgical Units is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts the Valleylab Force 1B Electrosurgical Units are carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on Valleylab Force 1B Electrosurgical Units. If necessary, parts are replaced to make sure that all aspects of the pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Valleylab system is working like new it undergoes a special cosmetic restoration process. The Valleylab Force 1B Electrosurgical Units are cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Unit functions and looks like new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Valleylab Force 1B Electrosurgical Units are labeled patient-ready and packed up for shipment, they go through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Valleylab System contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Technology, Inc. is also actively looking to purchase a Valleylab Force 1B Electrosurgical Unit. If you or your facility is looking to sell your Valleylab Force 1B Electrosurgical Units, be sure to contact Soma Technology, Inc. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Valleylab Force 1B Electrosurgical Units to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment.  If you have medical equipment you would like to sell to Soma, send us a message here!

 

Also in Electrosurgical Units

Frequently Bought Together

Banner

Questions about our Electrosurgical Units?

Soma Tech Intl offers a wide range of electrosurgical units. If you have any questions about any of our electrosurgical units or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your electrosurgical units? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us