Gaymar Medi-Therm II

Gaymar Medi-Therm II

The Gaymar Medi-Therm II machine provides a means of regulating patient temperature by delivering temperature-controlled water through a connecting hose to a Gaymar Hyper/Hypothermia blanket. The blanket provides an interface for heating or cooling the patient. A patient probe detects the patient’s temperature, which is displayed on the control panel. The Medi-Therm II machine controls the outlet water temperature by mixing hot and cold water using hot and cold solenoid valves under microcontroller control. A circulation pump, heater, and refrigeration unit are also used.

• Water inlets and outlets for two patient blankets
• Manual temperature (blanket temperature), automatic temperature (patient temperature), and monitor configuration and operation modes
• Patient probe connector at the front of the machine
• Digital display windows for blanket, patient, and setpoint temperatures (degrees C / degrees F toggle)
• Warning lights for checking water flow, checking the patient probe, adding water flow, and removing from service: instructions printed on the water fill cap
• 15-foot power cord

Dimensions

• Size: 94 cm high x 35 cm wide x 48 cm deep D
• Weight: 54.9 kg empty; 64.0 kg full

Physical specifications

• Material: Aluminum casing, 16-gauge steel chassis
• Flow rate: 1 liter per minute with Manta H/H
• Power: 220V, 240V, 50Hz, 6A
• Temperature settings: – Manual: 4 to 42 ° C – Automatic: 30 to 39 ° C
• Power cable: 4.6 m detachable power cable