Hillrom Affinity Three Birthing Bed
The Affinity Four birthing bed delivers on the promise of a safe birthing bed that functions in the busiest environment with ease. With the Affinity Three Stow and Go™ feature, the integrated foot section can simply slide under the bed during birth and back into place afterward. Or, if you choose the ergonomically designed lift-off version, simply place the foot section on the built-in stand.
- The Stow and Go foot section slides and stores under the bed – no lifting required. The foot section easily slides back into place without false latching or interference with linens.
- With battery backup, caregivers can use all the bed’s features, including changing height and position, when away from a power outlet, reducing the time from “decision to incision” in critical situations.
- The gas-assisted Trendelenburg mechanism allows the head of the bed to immediately lowered to 8 degrees.
- OneStep Siderail release provides zero transfer gap for safer and easier patient transfers.
- The bed’s streamlined design, with all the equipment stored completely within the perimeter (instead of protruding out), protects caregivers as they move quickly around the patient.
HIllRom Affinity Birthing Bed Specifications
Physical Description
- Total Length: 90″ (229 cm)
- Length from roller bumpers to break-in seat section: 61 7/8″ (157 cm)
- Length from a break in the seat section to end of bed: 28 1/8″ (71 cm)
- Maximum Width (side rails stored): 36″ (91 cm)
- Maximum Width (side rails up): 39″ (99 cm)
- Maximum Headboard Height: 52″ (132 cm)
- Maximum Siderail Height (without mattress): 14¾” (37.47 cm)
- Minimum Under-Bed Clearance: 5″ (13 cm), 3″ 7.6 cm) for Stow and Go™ Beds
- Wheel Base: 50″ x 29″ (127 cm x 74 cm)
- Mattress Width: 35″ (89 cm)
- Mattress Length: 78″ (198 cm)
- Mattress Thickness (head/seat): 4″ (10 cm)
- Mattress Thickness (foot): 3″ (8 cm)
- Detachable Power Cord, IEC 320/interface: US, 84″ (213 cm)/international, 98″ (249 cm)
- Caster Size: 6″ (15 cm) or 8″ (20 cm)
- Total Weight: 480 lb (218 kg)
- Head Section Inclination (maximum): 65°
- Seat Section Inclination (maximum): 15°
- Bed Height Range 18″ (46 cm) to 34″ (86 cm)
- Bed Height Range (with mattress) 22″ (56 cm) to 38″ (97 cm)
- Trend-Like position (maximum): 8°
Environmental Conditions for Use
- Temperature 59°F (15°C) to 104°F (40°C) ambient temperature
- Relative humidity ranges from 10% to 85% non-condensing
Environmental Conditions for Transport and Storage
- Temperature -40°F (-40°C) to 158°F (70°C)
- Relative humidity 95% non-condensing
- Pressure 15 “Hg (50 kPa) to 31 “Hg (106 kPa)
Main Power Requirements
- Rated voltage 120V AC/230V AC
- Power/input 4 A/2 A
- Frequency 50/60 Hz
Fuse Specifications
- Air system fuse (air system optional): 2 A, 250 V~, 5 x 20 mm, UL 198G Fast Acting
- Battery fuse 10 A, 32 V~, ATO
- Mains fuses (120 V bed model) 4 A, 125 V~, 5 x 20 mm, UL 198G Slo-Blo®a or equivalent
- Mains fuses (230 V bed model) 2 A, 250 V~, 5 x 20 mm, IEC127 Sheet III, Time Delay
Refurbished Hillrom Affinity Three Birthing Bed
Soma Tech Intl offers Hillrom Affinity Three Birthing Bed up to 50% below OEM prices with the same service and warranty as new. The Hillrom Affinity Three Birthing Bed is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Hillrom Affinity 3 Birthing Bed, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on beds. If necessary, parts are replaced to make sure that all aspects of the Hillrom Affinity Three Birthing Bed are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Hillrom Affinity Three Birthing Bed is working like new it undergoes a special cosmetic restoration process. The Hillrom Affinity Three Birthing Bed is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Hillrom Affinity Three Birthing Bed is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Hillrom Affinity Three Birthing Bed contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Hillrom Affinity Three Birthing Bed. If you or your facility is looking to sell your Hillrom Affinity 3 BirthingBed, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Hillrom Affinity Three Birthing Bed to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
