CSZ Blanketrol III Features
The CSZ Blanketrol III Hyper-Hypothermia Temperature Management System is used to lower or to raise a patient’s temperature and/or maintain a desired patient temperature through conductive heat transfer. The Blanketrol III system is composed of a heater, compressor, circulating pump, and blankets or pads. The system provides a fast response to core body temperature regulation.
- Gradient Temperature Technology that allows for rapid or gradual heating and cooling.
- 3 Hose connectors.
- Internal by-pass (pre-warming and pre cooling of water in the unit.
- Data export software allows for the patient’s data during treatment to be exported as a .csv file.
- Pressure sensitive touch switches, liquid crystal display, and two LED displays.
CSZ Blanketrol III Specifications
Dimensions
- Height: 37.5 in (95.25 cm)
- Width: 17 in (43.18 cm)
- Depth: 17 in (43.18cm)
- Weight (Empty): 131 lbs (59.4 kg)
Construction
- Microprocessor controlled, lighted “OFF-ON” power switch.
- Powder coated steel with plastic top. Divided reservoir. Bottom air discharge. Built-in handle. Bumper guard. Storage Compartment. 4” casters.
Temperatures
- Water Temperature Range: 39.2°F-107.6°F (4°C-42°C)
- Patient Temperature Controller: 86°F-104°F (30°C-40°C)
- High Control Setting Water: 107.6°F (42°C)
- Low Control Setting Water: 39.2°F (4°C)
Safety Temperatures
- Primary Safety: 111°F ±4°F (44.0°C ±2°C)
- Secondary Safety: 115°F ±4°F (46°C ±2°C)
Circulating System
- Divided Compartment Reservoir
- 2 gallon (7.5 liters) total capacity
- Error proof, quick-disconnect fittings
Flow Rate
- 42 Gallons (159 L) per hour (115v)
- 36 Gallons (136.3 L) per hour (230v)
Display Accuracy
- Water Temperature: ± 1°F (± 0.5°C) (measured at 37°C)
- Patient Temperature: ± .5°F (± 0.3°C)
Thermal System
- Compressor: 1/3 HP
- Heater: 800 Watts