Axia SB4 Imaging Table

The Axia SB4 is a four-movement imaging table intended to be used with mobile x-ray units and C-arms for minimally invasive procedures. The Axia SB4 uses a cantilevered (diving board) style designed without bellows and an “H” Style base that offers maximum C-arm clearance along the entire cantilevered length. The wide 24” top eliminates the need for arm boards, but still offers them as options if needed, and features a facial cut-out for prone procedures.

• Diving board style for easy C-arm access.
• Large patient capacity – 500 pound load.
• 2” patient high-quality comfort pad.
• Facial Cut-out for prone procedures.
• Lightweight - easy to physically move the table.
• 24” top eliminates need for arm boards.
• Simple to use top quality wheel locks.
• Easy patient transfer to table.

Dimensions

• Table Length: 86 in (218.4 cm)
• Table Width: 26 in (66 cm)
• Table Height: 30 to 38 in (76.2 to 96.5 cm)
• Weight Capactiy: 500 lbs (226.8 kg)

Tabletop / Imaging Area / General

• Tabletop (LWH): 84 x 24 x 1.62 in (213.4 x 61 x 4.1 cm)
• Radiolucent Area (LW): 56 x 24 in (142.2 x 61 cm)
• Material: Carbon Fiber - skin/foam
• Casters: 5 in (12.7 cm)
• Base (LW): I-Shaped Steel - 51 x 26 in (129.5 x 66 cm)
• Hand Control: Activates all Motions
• Patient Straps: 2
• Mattress: 2 in (5.1 cm)
• Facial Cutout: Yes

Power

• AC Voltage: 120V~
• Frequency: 60 Hz
• AC Current: 2.5 A
• Electric Shock Protection: Class I
• Applied Part Rating: Type B
• Mode of Operation: 10% Duty Cycle; 1 min on, 9 minutes off

Movements

• Height: 30 to 38 in (76.2 to 96.5 cm)
• Lateral Tilt: ±17°
• Tendelenburg: ±13°
• Longitudinal Travel: 10” (±5”)