Steris Amsco 400 Series Features
The Steris AMSCO 400 Series large steam sterilizers have a chamber size of 26 by 37.5 inches for high-volume sterilization processing. The Amsco 400 Series large sterilizer comes in two models, a manual hinged door, and an automated horizontal sliding door. This 400 series can safely sterilize up to 375 lbs per cycle. It’s a pre-vacuum steam sterilizer that efficiently sterilizes heat and moisture-stable materials. All autoclave models can be recessed into the wall or fully enclosed in a cabinet.
- 26 x 37.5-inch chamber (66 x 95.25 cm).
- Available in 36, 48, and 60-inch chamber lengths (95.25, 121.9, 152.4 cm).
- Manual hinged door or automated horizontal sliding door configuration.
- Non-lubricated steam-activated gasket.
- High-visibility display.
- Elliptical chamber for even pressure distribution.
- Fully jacketed construction that minimizes condensation.
- Electric vacuum pump.
- Fully insulated, to minimize heat loss to the surrounding environment.
Refurbished Steris Amsco 400 series Washer and Disinfactor
Soma Tech Intl offers Steris Amsco 400 series Washer and Disinfector up to 50% below OEM prices with the same service and warranty as new. The Steris Amsco 400 series is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Steris Amsco 400 series, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on washers and disinfectors. If necessary, parts are replaced to make sure that all aspects of the Steris Amsco 400 Series are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Steris Amsco 400 Series is working like new it undergoes a special cosmetic restoration process. The Steris Amsco 400 series is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Steris Amsco 400 Series is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Steris Amsco 400 Series contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Steris Amsco 400 Series. If you or your facility is looking to sell your Steris Amsco 400 Series be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Steris Amsco 400 Series to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!