GE Definium AMX 700

Quotes in less than 24 hours Download Specifications

GE Definium AMX 700 Features

The GE Definium AMX 700 is a portable X-ray machine that runs on rechargeable batteries. The quality of the X-ray machine includes a flat-panel digital detector and provides high-quality images at a low dose for patients. With the Mobility of the Definium AMX 700 is ideal for the ICU, ER, OR, and orthopedic facilities. it offers a larger imaging area and an interface that can work smoothly across other GE products. The GE portable X-ray machine comes with a flexible position arm that can rotate 270 degrees, making it easier to capture the image while the patient is comfortable. The unit comes with a touchscreen display making it easier to set the protocols for each time an image is taken. The system can store over 2,000 images or it can transmit the images to the facility’s computers through a PACS system for future storage.

  • 270° column flexibility.
  • Easy maneuverability.
  • 15” touchscreen display.
  • Single-piece detector.
  • Instant distribution and access to patient data.
  • Over 2,000 image storage.
  • Rotating anode X-ray tube.
  • Networking connectivity – DICOM 3.0 and IHE compatible.

GE Definium AMX 700 Specifications


  • Overall Width: 64.8 cm / 25.5 in (Includes front bumper)
  • Width at Midpoint: 64.1 cm / 25.25in
  • Overall Height 193 cm / 76 in
  • Tube Height: 142.2 cm / 56 in (Transport look over)
  • Overall Length: 115.6 cm / 45.5 in (includes handle)
  • Length: Base 111.1 cm / 43.75 in
  • Length, Full Horizontal 213.4 cm / 84 in Arm Extension
  • Weight: Shipping (w/battery) 559 kg (1,230 lbs). Unit Weight w/o batteries 468 kg (980 lbs).

Tube Positioning

  • Maximum Focal Spot: 201.2 cm / 79.2 in Height (standard)
  • Minimum Focal Spot: 62.4 cm / 24.6 in Height
  • Vertical Travel: 138.4 cm / 54.5 in
  • Maximum Horizontal: 107.6 cm / 42.4 in Extension
  • Minimum Horizontal 67.0 cm / 26.4 in Extension
  • Horizontal Travel 40.6 cm / 16.4 in

Flat-Panel Digital Detector

  • Active image area 41 x 41 cm
  • Dimensions 59 cm (H) x 47 cm (W) x 2.7 cm (D)
  • Weight 5.9kg
  • Active Matrix 2048 x 2048 pixels
  • Image Depth 14-Bit
  • Pixel Pitch 200 microns
  • Dynamic Range .67 uR – 11 mR
  • Typical DQE 67% @ 0 lp

Acquisition Workstation

  • 15 in touch screen monitor
  • Hard Disk Storage Images: 73 GB, stores >3200 typical
  • Fully Processed Image <15 seconds

Image Display Tools

  • Window width and level
  • Grayscale invert
  • Interpolated Zoom with roam
  • Image flips (horizontal, vertical)
  • Image Rotate – 90 degrees increments
  • Free rotation – 360 degree
  • L/R markers
  • Free text annotation
  • Manual shuttering


  • The unit is shipped with batteries fully charged.
  • Batteries are sealed lead-acid requiring no maintenance over the normal expected life of greater than 3 years. Batteries are “minimal liquid”, film electrolyte technology that will not leak even if damaged.
  • Nine 12-volt packs connected in series (108 V nominal).
  • Runs both motor drive and X-ray from the same pack.

Battery Charging System

  • Unit designed to be charged in any corridor or room space with normal ventilation. The unit should not be charged in closets, etc., or in areas using isolated power, e.g., surgery. Charges in 3 hrs 45 minutes (minimum).
  • The charger operates in any key switch position (fast charge while the system is OFF and slow charge while the system is ON).
  • Charger status displayed on message readout.
  • Automatic battery voltage sensor protects batteries from deep discharge and thereby prevents permanent battery damage.
  • Automatic battery status sensing with the programmed overcharging protocol for maximizing battery life.
  • The charger cord is provided with retraction into the base. Hospital grade line plug fits standard wall receptacle.
  • Maximum line draw: 5 A, 110 VAC (2.5A, 220 VAC)
  • All units are capable of charging from a 110 or 220 VAC nominal, 60 Hz, or 50 Hz wall plug.

Technical Control

  • The digital radiographic imaging system is available with a 12.5kW generator.
  • Closed loop kVp generator design using microprocessor regulation to assure constant and accurate kVp at all battery conditions.
  • mAs integrator measures actual mA to ensure accuracy, reproducibility, and station-to-station linearity for all exposures.
  • Switches are dome-type push buttons undercover. Technique adjustment is also available on a touchscreen monitor.
  • The hand switch controls the rotor prep, exposure, and remote field light.
  • ON/OFF removable key switch.
  • Audible tone: X-ray On.


  • kVp: 50 to 76 in 2 kVp steps 80 to 125 in 5 KVp steps
  • mAs: kVp range 50-90kV 0. 4 to 320 mAS, 95-105kV 0.4 to 250 mAs, 110-125 kV 0.44 to 200 mAs
  • Min exposure time 4ms
  • mA: 100 mA nominal

X-ray Source

  • Tube GE model D2651P
  • Focal Spot 0.8 mm
  • Target Angle 14°
  • Rotating Anode 3 in; 3,000 rpm
  • Anode Heat Storage Capacity 140,000 HU

Refurbished GE Definium AMX 700 Portable X-Ray System

Soma Tech Intl offers the GE Definium AMX 700 Portable X-Ray System up to 50% below OEM prices with the same service and warranty as new. The GE Definium AMX 700 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the GE Definium AMX 700, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on X-ray machines. If necessary, parts are replaced to make sure that all aspects of the GE Definium AMX 700 are to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the GE Definium AMX 700 is working like new it undergoes a special cosmetic restoration process. The GE Definium AMX 700 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the GE Definium AMX 700 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished GE Definium AMX 700 X-Ray systems contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is actively looking to purchase aGE Definium AMX 700. If you or your facility is looking to sell your GE Definium AMX 700, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned GE Definium AMX 700 to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Techn Intl’s purchasing department at [email protected] or send us a message on our Sell to Soma website.


Questions about our Portable X-Ray Machines?

Soma Tech Intl offers a wide range of portable X-ray machines. If you have any questions about our X-ray machines or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your portable X-ray machines? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us