Steris InnoWave PCF Ultrasonic Cleaner Features
The InnoWave PCF Ultrasonic Cleaner is a high-pressure flushing water disinfector. It is intended to provide cleaning and thermal disinfection of surgical instruments. The cleaning process is a combination of sonic irrigation (ultrasonic cavitation ), and lumen flushing to remove all the impurities from the instrument placed within the tank. It is meant to speed up your workflow and improve the cleanliness of your surgical instruments.
- Precise and thorough cleaning, through the means of sonic irrigation and lumen flashing.
- Allows for cleaning of a variety of surgical instruments.
- Speeds up the cleaning process.
- Thermal Disinfection assures clean and sterile equipment.
- Ease of use and, compatibility with most common surgical instrument trays.
- Auto-Tuning Frequencies
- Reflectasonic Technologies
- Easy to use Touch Screen Control
- One Pick-up Tube
- Integrated USB Port
- Operator PINs
- Cycle Monitoring
- Front Doors and Side Service Access Panels
Steris InnoWave PCF Ultrasonic Cleaner Specifications
DIMENSIONS
- Dimensions, Lid Closed: 34.9″ x 42.6″ x 27.8″ (887 mm x 1083 mm x 706 mm)
- Dimensions, Lid Open: 34.9″ x 58.7″ x 27.8″ (887 mm x 1493 mm x 706 mm)
- Basket Dimensions: up to 26.3″ x 13.3″ x 5.0″ (668 mm x 338 mm x 126 mm)
- Service Access Clearance: Minimum 6″ (150 mm) sides; 11″ (279 mm) rear
CAPACITY
- Capacity of Connected Instruments: 20 Lumened Instruments
- Maximum Load Weight: 44 lb (20 kg)
ULTRASONIC PERFORMANCE
- Ultrasonic Performance: >48 Watts/US gal (181 Watts/L)
- Ultrasonic Frequency: 38 kHz to 40 kHz (dependent on load)
- Ultrasonic Bath Size: Large enough to submerge devices with at least 1″ (25mm) clearance around all ultrasonic edges.
UTILITY REQUIREMENTS
Drain: 3/4″ hose tail outlet from the unit. Facility drain must be fitted with suitable traps. Drain hose supplied with Unit. Overflow: 1.9″ (48 mm) OD outlet from the machine in same as drain. The overflow hose connection to the main drainage system must not be airtight. Note: Drain entry and entire drain hose must be less than 20″ (508 mm) above ground level, measured from the Unit rear middle. Facility Drainpipe ID must be at least 4″ (100 mm).
Drain Flow Rate: >8 US gal/min. (>30 L/min.)
Hot Water: 3/4″ BSP Connection; 30 psi to 70 psi (2 bar to 5 bar); +122 °F to +176 °F (+50 °C to +80 °C)
Cold Water: 3/4″ BSP Connection; 30 psi to 70 psi (2 bar to 5 bar); +41 °F to +86 °F (+5 °C to +30°C)
Flow Rate: 3 US gal/min. to 8 US gal/min. (11 L/min to 30 L/min.)
Heating Rate: 9 °F/min. (5 °C/min.)
CHEMISTRY
- Recommended Chemicals (North America )
- ProlysticaR HP enzymatic automated detergent, 2.5 US gal (9.4 L)
- Hinge-FreeTM WR, 10 L (2.6 US gal)
- Hinge-FreeR lubricant, 4 x 1.0 US gal (4 x 3.8 L)
- Recommended Chemicals (Other )
- 8E-Zyme multi-enzymatic cleaner, 10.0 L (2.6 US gal)
- Hinge-FreeTM lubricant, 2 x 5.0 L (2 x 1.3 US gal)
- Prolystica HP neutral automated detergent, 10.0 L (2.6 US gal)
- Prolystica HP enzymatic automated detergent, 10.0 L (2.6 US gal)
- ProlysticaTM HP multi-enzymatic cleaner, 10.0 L (2.6 US gal)
- Prolystica HP alkaline automated detergent, 10.0 L (2.6 US gal)
Refurbished Steris InnoWave PCF Ultrasonic Cleaners
Soma Tech Intl offers Refurbished Steris InnoWave PCF Ultrasonic Cleaner up to 50% below OEM prices with the same service and warranty as new. The Steris Ultrasonic Cleaner is not only technically refurbished but also cosmetically refurbished to make it work and look new. When the refurbishing process starts on Steris Ithe Ultrasonic Cleaner is carefully inspected and tested by our in-house biomedical engineers who are highly skilled and certified to work on Ultrasonic Cleaners. If necessary, parts are replaced to make sure that all aspects of the cleaner are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Steris InnoWave PCF Ultrasonic Cleaner is working like new it undergoes a special cosmetic restoration process. The Ultrasonic Cleaner is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the cleaner functions and looks new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the cleaner is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Steris InnoWave PCF Ultrasonic Cleaner contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Steris InnoWave PCF If you or your facility is looking to sell your Steris Ultrasonic Cleaner, be sure to contact Soma Tech. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Steris Ultrasonic Cleaner to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
