Datex-Ohmeda 5330 Features
The Datex-Ohmeda 5330 is a compact anesthetic agent monitor for the operating room. The Ohmeda 5330 uses infrared and microprocessor technology to measure CO2 and the concentration of anesthetic agents on the display. The monitor identifies whether the sampled breath is from an inspiratory or Expiratory breath phase. It has a membrane switch control panel and disposable water separator filter cartridge.
- Monitors isoflurane, Enflurane, Halothane, Desflurane, and Sevoflurane.
- Trend data collection.
- Agent analog output for strip chart recording.
- Measurement of inspired and expired anesthetic agents.
- Sidestream sampling system to allow the use of a wide variety of sample adapters.
- User-replaceable software cartridge for system updates.
- RS-232 communication port for input and output to computers or printers.
Datex-Ohmeda 5330 Specifications
Dimensions
- Height: 4” (10 cm)
- Width: 16” (40 cm)
- Depth: 10” (25 cm)
- Weight: < 15 lb (< 7 kg)
General
- Analog Output: ENF, HAL, ISO, and SEV vol%: 10%; DES vol%: 20%
- Display Range: ISO, HAL, ENF, and SEV – 0 to 9.9% (analog output 0 to 1 V); DES – 0 to 24% (operating at sea level)
- Resolution: ISO, HAL, ENF, SEV, and DES: 0.1%
- Displayed Parameter: Agent Concentration %
- Response Time: 600 msec (10-90% step at 280 ml/min)
- Sample Flow Rate: 250 ml/min minimum
- Breath Rate: 20 breaths per minute maximum for the display of inspired and expired values
- Warmup Time: 5 minutes, full accuracy in 30 minutes
Communications
- Type: Both serial and analog communication
- Connection: RS-232 and DB-9
Refurbished Datex-Ohmeda 5330 Agent Monitor
Soma Tech Intl offers Datex-Ohmeda 5330 Agent Monitor up to 50% below OEM prices with the same service and warranty as new. The Datex-Ohmeda 5330 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the agent monitor, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on agent monitors. If necessary, parts are replaced to make sure that all aspects of the Datex-Ohmeda 5330 are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Datex-Ohmeda 5330 agent monitor is working like new it undergoes a special cosmetic restoration process. The Datex-Ohmeda 5330 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Datex-Ohmeda 5330 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Datex-Ohmeda 5330 agent monitor contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Datex-Ohmeda 5330 If you or your facility is looking to sell your Datex-Ohmeda 5330 agent monitor, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Datex-Ohmeda 5330 to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
