Drager Vamos Plus

The Drager Vamos Plus is an efficient anesthetic gas monitor for use with adult, pediatric, and neonatal patients. For patient monitoring, concentrations of carbon dioxide, nitrous oxide, and volatile anesthetic gases in the respiratory gas mixture are measured and displayed. The carbon dioxide concentration is displayed as a real-time curve on the Drager Vamos Plus. Additionally, inspiratory and expiratory concentrations are displayed for all measured gas concentrations. The respiratory rate is determined from the carbon dioxide concentration curve and then displayed

• Automatically detects anesthetic agents.
• Uses a Waterlock 2 water trap that protects the sensors from condensed water, pathogens, and other contaminants.
• Simple and easy-to-use navigation and user-interface.
• Minimal maintenance and has a long service life.

Dimensions

• Height: 6.5” (16.6 cm)
• Width: 9.4” (24 cm)
• Depth: 6.5” (16.6 cm)
• Weight: 4.6 lbs. (2.1 kg)

Display

• Type: High-contrast amber electroluminescent display with excellent vertical and horizontal viewing angles.
• Display Size: 5” diagonal 4.25” x 2.28” (127 mm diagonal 108 x 58 mm)
• Graphic Display of CO2: waveform

General

• Sample Flow Rate: 200 ± 20 ml/min
• Interface: 1x RS 232 (MEDIBUS protocol)
• Warm-up time at ambient temperature > 13 °C: < 5 min
• System Response Time: < 3.0 s

CO2

• Measuring Range: 0 to 10 Vol %; 0 to 10 kPa; 0 to 76 mmHg
• Accuracy: ±(0.43 Vol % + 8 % rel.); ±(0.43 kPa % + 8 % rel.); ±(3.3 mmHg % + 8 % rel.)
• Response time (t10/90): < 300 ms

N2O

• Measuring range: 0 to 8.5 Vol % (isoflurane and halothane); 0 to 10 Vol % (sevoflurane and enflurane); 0 to 20 Vol % (desflurane)
• Accuracy: ±(0.20 Vol % + 15 % rel.)
• Response time (t10/90): < 450 ms

Anesthetic Agents

• Measuring Range: 0 to 100 Vol %
• Accuracy: ±(2 Vol % + 8 % rel.)
• Response Time (t10/90): < 300 ms

Respiratory Rate

• Respiratory Rate Measuring Range: 0 to 100 /min
• Accuracy (I:E 1:2): 0 to 80 /min: ±1 /min; > 80 /min: not specified