SciCan STATIM 5000 Features
The SciCan STATIM 5000 autoclave is designed to provide a complete sterilization solution for unwrapped and wrapped instruments. The STATIM 5000 provides rapid sterilization balanced with rapid drying. The heat from the sterilization process is absorbed by unique drying plates located in the sterilization chamber. It’s then transferred from the drying plates to the instruments utilizing radiant heat.
- Sterilizes handpieces and instruments for immediate use in as little as 9 minutes.
- Thin stainless steel walls of the STATIM’s fully-removable cassette, allow for rapid heating and cooling of the chamber.
- Uses radiant heat to dry instruments by utilizing the remaining heat in the system after a sterilization process.
- Has an integrated internal printer.
SciCan STATIM 5000 Specifications
Machine Dimensions
- Height: 7.5” (19 cm)
- Width: 16.25” (41.3 cm)
- Depth: 21.75” (55.2 cm)
- Weight: 72 lbs (32.7 kg)
Cassette Size (Internal)
- Height: 3” (7.6 cm)
- Width: 7” (17.8 cm)
- Depth: 15” (38.1 cm)
Power Consumption
- Watts: 1,300 watts
Printer
- Type: Thermal Paper
- Print: 20 Characters Per Line
- Speed: 1 Line Per Second
- Capacity: 80 Cycles Per Roll
Cycle Times
- Unwrapped: 9 Minutes*
- Wrapped: 15-18 Minutes*
- Rubber & Plastics: 40 Minutes*
- Heavy Duty Unwrapped: 12 Minutes*
- *Cycle times vary depending on load size
Reservoir Capacity
- Reservoir Capacity: 1.05 Gallons (4 Liters)
Refurbished SciCan Statim 5000 Autoclave
Soma Tech Intl offers SciCan Statim 5000 Autoclave up to 50% below OEM prices with the same service and warranty as new. The SciCan Statim 5000 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the SciCan Statim 5000, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on autoclaves. If necessary, parts are replaced to make sure that all aspects of the SciCan Statim 5000 are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the SciCan Statim 5000 is working like new it undergoes a special cosmetic restoration process. The SciCan Statim 5000 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the SciCan Statim 5000 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished SciCan Statim 5000 autoclaves contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a SciCan Statim 5000 Autoclave If you or your facility are looking to sell your SciCan Statim 5000, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned SciCan Statim 5000 to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
