ENGLISH 
Español
Tuttnauer 2540M
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications
Tuttnauer 2540M Features
The Tuttnauer 2540M offers steam sterilization for your medical facility. The 2540M was designed to sterilize both wrapped and unwrapped instruments. The Autoclave is semi-automatic with an effortless Plug ‘ Play solution. The sterilization chamber is inches by 19 inches and comes with 4 standard strays. The Model features an easy-to-use control panel. The 2540M autoclave will satisfy all of your sterilization needs without compromising on quality, safety, or reliability.
- Automatic shut off at the end of both the sterilization and dry cycles.
- A long-life electro-polished chamber and door.
- A double safety locking device prevents the door from opening while the chamber is pressurized.
- The drain valve is located on the front, allowing for quick and easy draining of the water reservoir.
- Dual safety thermostat to protect against overheating.
- International certifications
Tuttnauer 2540M Specifications
Technical Specifications
- Chamber Dimensions: 10″ x 19″ (254 x 475 mm)
- Chamber Volume: 6 gal (23 L)
- Overall Dimensions LxWxH: 21.5″ x 20″ x 14.4″ (545 x 510 x 365 mm)
- Standard Cassettes Capacity: 3 full and 3 half
- Tray Dimensions DxWxH: 16.3″ x 6.7″ x 0.8″ (415 x 170 x 20 mm)
- No. of Trays: 4
- Standard Unwrapped Cycle Time: 30 min. cold, 14 min. hot
- Voltage: 120v
- Frequency: 50/60 MHz
- Power: 1400W
- Current: 12A
- Autoclave Weight: 85 lbs (39 kg))
Speed & Volume
- 6 gallons
- Holds 3 full and 3 half standard cassettes
- Cycle time from cold start -30 minutes
- Cycle time from hot start -11 minute
- Adjustable to 273°F (134°C) and 30 psi
Refurbished Tuttnauer 2540M Sterilizer
Soma Tech Intl offers Tuttnauer 2540M autoclaves up to 50% below OEM prices with the same service and warranty as new. The Tuttnauer 2540M is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Tuttnauer 2540M, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on sterilizers. If necessary, parts are replaced to make sure that all aspects of the Tuttnauer 2540M are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Tuttnauer 2540M is working like new it undergoes a special cosmetic restoration process. The Tuttnauer 2540M is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Tuttnauer 2540M is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Tuttnauer 2540M autoclaves contact soma at Soma@SomaTechnology.com or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Tuttnauer 2540M. If you or your facility is looking to sell your Tuttnauer 2540M, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Tuttnauer 2540M to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
