HillRom Affinity 4 Birthing Bed

Quotes in less than 24 hours Download Specifications

HillRom Affinity 4 Birthing Bed Features

The HillRom Affinity 4 birthing bed is optimal in labor, delivery, recovery, and postpartum acute care labor and delivery settings. The Affinity 4 can support a patient with a maximum weight of 470 lbs. It has a battery backup and a gas-assisted Trendelenburg mechanism to allow the head of the bed to lower quickly to 8°. This HillRom birthing bed allows for many multi-positioning opportunities to accommodate every individual during the labor and delivery process.

  • V-cut or straight edge mattress.
  • 470 lb. patient weight capacity.
  • Trendelenburg positioning.
  • Battery backup.
  • Fluid basin.

HillRom Affinity 4 Birthing Bed Specifications

General

  • Safe Working Load Weight: 500 lbs (227 kg)
  • Maximum Patient Weight: 470 lbs (213 kg)
  • Castors: 6 in (15 cm)
  • Bed Weight: Lift-off: 478.4 lbs. (217 kg)
  • Stow and Go Weight: 511.4 lbs. (232 kg)

Maximum Lift Capacity

  • Bed: 500 lbs. (227 kg)
  • Foot Section: 400 lbs. (181 kg)

Bed Length

  • Length: 92.125 in (234 cm)

Bed Height

  • Low (With mattress): 22 in (56 cm)
  • High (With mattress): 38.2 in (97 cm)
  • Maximum Height of Seat in Trendelenburg: 40.2 in (102 cm)

Bed Width

  • Siderails Up: 470 lbs (99 cm)
  • Siderails Down: 470 lbs (91 cm)

Mattress

  • Length: 78 in (198 cm)
  • Width: 35 in (89 cm)
  • Thickness (Head section): 5 in (12.7 cm)
  • Thickness (Foot section): 3.5 in (8.9 cm)

Critical Angles

  • Maximum Head Elevation: 63°
  • Maximum Seat Elevation: 15°
  • Maximum Trendelenburg Positioning: 8°

Refurbished Hillrom Affinity Four Birthing Bed

Soma Tech Intl offers HillRom Affinity Four birthing beds up to 50% below OEM prices with the same service and warranty as new. The Hillrom Affinity 4 birthing bed is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Hillrom birthing bed, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on hospital beds. If necessary, parts are replaced to make sure that all aspects of the Affinity four are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Affinity Four is working like new it undergoes a special cosmetic restoration process. It is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Hillrom Affinity Four Birthing Bed is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Hillrom Affinity 4 Birthing Bed contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a HillRom Affinity Four birthing bed If you or your facility is looking to sell your HillRom Affinity 4 birthing bed, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned HillRom Affinity Four Birthing Bed to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!

 

Banner

Questions about our Beds and Med/Surg Beds?

Soma Tech Intl offers a wide range of  MedSurg Beds. If you have any questions about any of our beds or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your beds? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us