ENGLISH 
Español
GE OEC 9800 Plus C-Arm
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications
OEC 9800 Plus Features
The GE OEC 9800 Plus C-Arm is a mobile c-arm that was designed with a variety of X-ray applications in mind. Soma of these applications includes pain management, orthopedic, vascular, neurovascular, and cardiac surgeries. The OEC 9800 offers x-ray technology with a touch screen system with low X-ray dosages and a 15kW generator. The 9800 Plus offers 1K x 1K high-resolution images, along with GE’s image intelligence technology providing extraordinary crisp and clear images. The newer GE C-arm is the GE OEC 9900 Elite C-Arm.
- 9-Inch or 12-Inch Image Intensifier
- Rotating Anode X-Ray Tube
- High-Resolution CCD Camera, 1K x 1K x 12-bit Imaging
- 0.3/0.6 mm Focal Spot 5.3kW/41kW
- Dual High Resolution 16” Monitors
- Touch Screen Controls (right monitor)
- 400 Image Storage
- Patient Annotation
- 16 Image Collage
- 32 Frames Noise Reduction
- Sharpen, Negate, Zoom
Smart Window
Smart window technology dynamically sense the collimator position and automatically adjusts the sampling windows size to optimize the image quality further.
- Dual-leaf tungsten collimator.
- Levels contrasts.
- Adjusts the brightness.
Smart Metal
Smart Metal is a unique innovation from GE. After Smart Metal is initialized, optimized image resolutions are maintained even with the introduction of metal objects into the X-ray imaging field.
- No need for manual brightness and contrast adjustments are needed.
- Reduces system sensitivity to metal.
AutoTrak
During live fluoroscopy procedures it is important to keep maximum visibility regardless of the patient’s anatomy moves. With the introduction of AutoTrak, the sampling window automatically moves with the anatomy, ensuring excellent images regardless of collimation or centering. If the subject anatomy moves within the field of view, AutoTrak will maintain the correct exposure, even if the anatomy moves to the edge of the imaging field or is improperly collimated.
- Detect subject anatomy with dynamic sampling window.
- Reduction of dark images and burn-out.
- Image stabilization means fewer images and lower doses to physicians and patients.
- True point-and-shoot technology in most imaging situations.
GE 9800 Plus Specifications
X-Ray System
Specialty Packages Available
- GSP
- ESP
- ESP 8 FPS
- Vascular
- Vascular 8/15 FPS
- Neurovascular 30 FPS
- Cardiac 30 FPS
- Super C
Generator
- 60 kHz High frequency
- 15 kW full-wave
- Up to 120 kVp
- Up to 75 mA for radiographic film exposures.
- Continuous fluoro boost mode up to 20 mA
- Pulsed fluoro mode
- Pulsed fluorography mode up to 40 mA. (optional)
- Full power from outlet:
- 50 Hz or 60 Hz
- 100V-15A to 240V-10A.
- Patented energy buffer design.
X-Ray Tube
- Rotating anode X-ray tube.
- Focal spots: 0.3 mm and 0.6 mm.
- Anode heat capacity: 300,000 HU.
- Anode cooling rate: 60,000 HU/min.
- Housing heat capacity: 1,600,000 HU.
- Anode diameter: 3.1 in.
- Anode angle: 10°.
- X-ray tube cooling fan. (Vascular, Neurovascular & Cardiac units.)
Collimator
- Iris collimation with dual opposing semi-transparent leaf shutters allows elliptical, round, and rectangular collimation.
- Minimum beam size < 5 X 5 cm2.
- Iris and shutters are continuously variable.
- All functions are remotely controlled from the C-Arm control panel.
Fluoroscopy Mode
- Focal spot: 0.3 mm
- kVp range: 40 – 120 kVp
- mA range: 0.2 – 10 mA normal mode
- mA range: 0.2 – 20 mA continuous fluoro boost mode.
- Auto and manual modes.
- Continuous, one-shot, or pulsed operation.
- ABS varies mA, kVp, and camera gain.
- User specific ABS tables
Pulsed Fluoroscopy Mode
- Focal spot: 0.3 mm.
- kVp range: 40 – 120 kVp.
- mA range: 0.2 – 10 mA
- Pulse rate: 1, 2, 4, or 8 pulses per second.
- Pulse width: 30 or 50 milliseconds.
- Computer-controlled ABS, mA, kVp, and camera gain.
Pulsed Fluorography Mode (optional)
- Focal spot: 0.3 mm.
- kVp range: 40 – 120 kVp.
- mA range: Up to 40 mA
- Pulse rate: 1, 2, 4, or 8 pulses per second.
- Pulse width: 30 or 50 milliseconds.
- Computer-controlled camera iris, mA, kVp, & camera gain.
Digital Spot Mode
- Focal spot: 0.3 mm.
- kVp range: 40 – 120 kVp.
- mA range: 1.0 – 75 mA.
- Automatically terminates exposure and stores enhanced image to storage archival disk.
Radiographic Mode
- Focal spot: 0.3 mm or 0.6 mm.
- Focal spot automatically selected.
- kVp range: 50 – 120 kVp.
- 0.3 mm – mAs range: 1 – 100 mAs.
- 0.6 mm – mAs range: 110 – 300 mAs.
Video Imaging System
Image Intensifier
9 in Image Intensifier
- Tri-mode 9 in/6 in/4.5 in image intensifier
- 9 in. 2.3 lp/mm.
- 6 in. 3.2 lp/mm.
- 4.5 in. 3.8 lp/mm.
- DQE: 65%. (typical)
12 in Image Intensifier. (optional)
- Tri-mode 12 in/9 in/6 in image intensifier:
- 12 in. 1.7 lp/mm.
- 9 in. 2.3 lp/mm.
- 6 in. 3.0 lp/mm.
- DQE: 65%. (typical)
Video Camera
- High resolution CCD camera.
- 1,004 x 1,004 pixels.
- Full frame capture.
- 360° motorized rotation.
- On-screen orientation indicator. (real-time feedback without fluoro.)
- Left-right image reversal
- Top-bottom image reversal.
- Negative mode.
- Computer-controlled features:
- Gain
- Blanking
- Camera iris
Video Monitors
- Dual 16 in, black etched, anti-glare, anti-static.
- Touch Screen Display.
- Ambient room light sensor.
- Multi-LED X-ray “ON” indicator.
- Remote window/level controls.
Hardcopy Options
- Thermal printer. (optional)
- DICOM (optional)
- Image Capture Device. (optional)
- Laser Aiming Device. (optional)
C-Arm Dimensions
- Height: 69 / 87 in (1734 / 2191 mm)
- Width: 33 in (838 mm)
- Length: 79 in (1994 mm)
- Weight: 720 lb
Workstation Dimensions
- Height: 64 in (1632 mm)
- Width: 27 in (692 mm)
- Depth: 27 in (692 mm)
- Weight: 430 lb
Refurbished OEC 9800 Plus C-Arm
Soma Technology, Inc. offers the GE OEC 9800 Plus C-Arm up to 50% below OEM prices with the same service and warranty as new. Soma Technology technically and cosmetically refurbishes these C arms back to the original engineering manufacturer’s specifications. Using highly skilled, trained, and certified in-house biomedical engineers these units are fully tested, disassembled, and if necessary, parts are replaced. Once all the parts of the GE OEC 9800 are in working order, the electrosurgical unit is calibrated back to OEM specifications, to make sure it works exactly the way it did when it originally left the manufacturer. Soma Technology not only refurbishes the product, but each unit also goes through a Special cosmetic restoration process. The 9800 Plus c arm is cleaned and minor scratches and dentures are repaired, and decals are replaced if necessary.
Soma Tech Intl also purchases used and pre-owned C-arm units. If you or your facility wants to sell your GE 9800 plus, Soma Tech has an experienced purchasing department that makes the process headache and hassle-free. When selling your C arm to Soma, there is no need for a middle man, it is a direct transaction to Soma that ensures you get top dollar for your medical equipment. Soma Tech Intl not only buys c-arms but also buys a wide variety of different medical equipment if your medical facility is looking to free up space. If you have medical equipment you would like to sell to Soma, send us a message!
