The Zoll M Series combines a defibrillator, ECG display, advanced monitoring capabilities, and noninvasive transcutaneous pacing (NTP) with communication, data printing and recording capabilities to make a single lightweight and portable instrument. The M Series is been designed for all resuscitation situations and its small, compact, and lightweight design makes it ideal for accompanying patients during transport. This AED/Defibrillator is designed for use in both the hospital and the rugged EMS environment. It features CPR monitoring by evaluating the rate and depth of chest compressions while providing feedback to the rescuer. When equipped with a PCMCIA card, the Zoll M Series defibrillator records ECG and virtually all device data when the device is turned on. In addition, voice data from any incident around this device can also be recorded. Looking for parts and accessories? Soma Technology offers a wide variety of zoll m series accessories and parts.
Expanded information and Connectivity The M Series ex p a n d s your information capabilities. A new code marker system follows AHA algorithms and makes charting easy with “one-touch” voice and data annotation. New code markers print on Summary Reports and a removable PCMCIA card provides easy downloading of information to a PC for Utstein template analysis. A MIB card and RS 232 card provide true open architecture connectivity to HIS and CIS.
Simple Connections for Operator Confidence,/br> The M Series provides a common connector for paddles and pads. There are no adapters or misconnections that can delay life-saving efforts. Built-in pediatric paddles and a complete line of disposable electrodes meet all demands
Xtreme Pack for Protection and Cable Management — The Xtreme Pack protects the M Series in even the harshest usage situations. The durable and resilient rubber jacket conveniently stores cables, electrodes, batteries, and accessories. The washable jacket completely surrounds the unit for unmatched protection, and immediate access to all controls, patient connections, and displays.
Built-in Recoder for accurate Documentation —A built-in 3-channel strip chart recorder with 60mm paper provides a printout for all ECGs, a full code s u m m a ry, as well as defibrillation, pacing, patient care, and treatment documentation following the event.
Always Ready with Built-in AC Power and Battery Charger An internal charger automatically recharges the battery whenever the unit is plugged in. Built-in AC power allows the unit to operate continuously anywhere in the hospital.
The M Series products and their accessories are chemically resistant to most common cleaning solutions and non-caustic detergents. The following list includes approved cleaning solutions;
ZOLL recommends cleaning the device, paddles, and cables with a soft damp cloth, and cleaning agents mentioned. The recorder parts should be cleaned with a damp, soft cloth only.
Do not immerse any part of the unit (including paddles) in water. Do not use ketones (MEK, acetone, etc.). Avoid using abrasives (e.g., paper towels) on the display window. Do not sterilize the unit.
Special care should be taken to clean the defibrillation paddles after each use. Build up of gel will interfere with paddle ECG (first look) monitoring and may produce a shock hazard to the operator. Keep paddle handles clean.
To clean the Recorder printhead perform the following steps:
Press down and pull the paper tray drawer where the “RELEASE” label is located. The drawer slides open.
Check for adequate paper supply. If paper supply is low, remove paper in the tray. Place a new pad of thermal paper in the drawer with the paper coming off the top of the pad and the grid facing up.
Pull enough paper off the pad so that the paper extends out of the strip recorder when the paper compartment drawer is closed.
Close paper compartment drawer by pushing the drawer in and pressing down lightly where the “RELEASE” label is located until the drawer is flush with the front of the device.
Manual External Defibrillator
Manual Internal Defibrillator
Automated External Defibrillator (AED)
Semi-Automated External Defibrillators
Implantable Cardioverter Defibrillator
Soma Technology, Inc. offers Refurbished Zoll M Series Defibrillator System up to 50% below OEM prices with the same service and warranty as new. The Zoll M Series Defibrillator is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Zoll M Series is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on Zoll M Series Defibrillator . If necessary, parts are replaced to make sure that all aspects of the pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Zoll system is working like new it undergoes a special cosmetic restoration process. The Zoll M Series Defibrillator is cleaned, minor scratches and dents are repaired, it's painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Unit functions and looks like new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Zoll M Series Defibrillator is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Zoll Defibrillator System contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Technology, Inc. is also actively looking to purchase a Zoll M Series Defibrillator If you or your facility is looking to sell your Zoll M Series Defibrillator , be sure to contact Soma Technology, Inc. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Zoll M Series Defibrillator System to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment, or looking to upgrade current equipment, contact Soma Technology’s purchasing department at [email protected] or send us a message on our Sell to Soma website.
Soma Technology, Inc offers a wide range of defibrillators. If you have any questions about any of our defibrillators or need a quick quote, call 1-800-GET-SOMA and one of our knowledgeable sales representatives will help you.