Medtronic Bio-Medicus 540 With Sarns 11160
ECMO Package
Soma Tech Intl offers full ECMO setups for up to 50% below the cost of new ones with the same service and warranty contracts from the manufacturer. Our ECMO machines are fully refurbished and reconditioned mechanically and technically which ensures the ECMO device functions like new. This extracorporeal membrane oxygenation setup comes with the Medtronic Bio-Medicus 540 centrifugal pump, the Terumo-Sarns 11160 heater/cooler system, and a blender.
Medtronic Bio-Medicus 540 Centrifugal Pump
The Medtronic Bio-Medicus 540 Bio-Console is used with the Bio-pumps in the extracorporeal perfusion (ECMO) circuit. The Bio-Console 540 is compatible with BP80, BP50, and 600 Bio-pumps. The Medtronic 540 ECMO machine comes with a variable-speed pump motor and ancillary system for flow monitoring. The 540 has two panels mounted on pull-out doors that contain controls, circuit breakers, and other controls to make periodic settings before or during operation.
Terumo Sarns 11160 Heater/Cooler System
The Sarns 11160 is a portable dual heater/cooler that can deliver water up to 10.5 gallons per minute with a maximum pressure output of 11 PSI. This Sarns heater/cooler is used with blood heat exchangers. This unit has three modes of operation. It can be used in cooling mode, recirculation mode, or heating mode. While in cooling mode, the water is pumped through an ice-water tank. The output temperature of the water is continuously monitored by the thermometer. In recirculation mode, the water is pumped through the heater manifold, however, the heating element is not on. In heating mode, the water is pumped through the heater manifold and the heating element heats the water to any one of 4 preset temperatures.
