Medtronic Bio-Medicus 550 With Sarns 11160
ECMO Package
Soma Tech Intl offers full ECMO setups for up to 50% below the cost of new ones with the same service and warranty contracts from the manufacturer. Our ECMO machines are fully refurbished and reconditioned mechanically and technically which ensures the ECMO device functions like new. This extracorporeal membrane oxygenation setup comes with the Medtronic Bio-Medicus 550 centrifugal pump, the Terumo-Sarns 11160 heater/cooler system, and a blender.
Medtronic Bio-Medicus 550 Centrifugal Pump
The Medtronic Bio-Medicus 550 centrifugal pump is an extracorporeal blood pumping system that can be connected to heart-lung machines. The 550 comes with an RPM knob that helps control and monitor the flow and pressures. The Bio-console pump comes with an alarm system that goes off when the RPM values go below 200. The 550 has two panels mounted on pull-down doors that contain controls, circuit breakers, and other controls to make easy changes during operation. The system has a color display for easy reading.
Terumo Sarns 11160 Heater/Cooler System
The Sarns 11160 is a portable dual heater/cooler that can deliver water up to 10.5 gallons per minute with a maximum pressure output of 11 PSI. This Sarns heater/cooler is used with blood heat exchangers. This unit has three modes of operation. It can be used in cooling mode, recirculation mode, or heating mode. While in cooling mode, the water is pumped through an ice-water tank. The output temperature of the water is continuously monitored by the thermometer. In recirculation mode, the water is pumped through the heater manifold, however, the heating element is not on. In heating mode, the water is pumped through the heater manifold and the heating element heats the water to any one of 4 preset temperatures.
