Terumo-Sarns 3M Delphin II With Sarns 11160
ECMO Package
Soma Tech Intl offers full ECMO setups for up to 50% below the cost of new ones with the same service and warranty contracts from the manufacturer. Our ECMO machines are fully refurbished and reconditioned mechanically and technically which ensures the ECMO device functions like new. This extracorporeal membrane oxygenation setup comes with the Terumo-Sarns 3M Delphin II centrifugal pump, the Terumo-Sarns 11160 heater/cooler system, and a blender.
Terumo-Sarns 3M Delphin II Centrifugal Pump
The Terumo-Sarns 3M Delphin II is a non-roller type centrifugal pump that is equipped with a magnetically coupled acrylic housing pump with inflow and outflow ports oriented at right angles of each other. The Priming volume of the Delphin II is about 40ML and the blood flow is measured by an ultrasonic flowmeter along the outlet tubing. Equipped with the single-use pump head it has an outflow capacity between 0 and 9.9 L/min.
Terumo Sarns 11160 Heater/Cooler System
The Sarns 11160 is a portable dual heater/cooler that can deliver water up to 10.5 gallons per minute with a maximum pressure output of 11 PSI. This Sarns heater/cooler is used with blood heat exchangers. This unit has three modes of operation. It can be used in cooling mode, recirculation mode, or heating mode. While in cooling mode, the water is pumped through an ice-water tank. The output temperature of the water is continuously monitored by the thermometer. In recirculation mode, the water is pumped through the heater manifold, however, the heating element is not on. In heating mode, the water is pumped through the heater manifold and the heating element heats the water to any one of 4 preset temperatures.
