1.800.GET.SOMA (1.800.438.7662)

Bovie IDS 400

click on thumbnail to zoom

Other products by Bovie Aaron
Other products in Electrosurgical Units

Specifications

24 Hour Turn Around Time - The Fastest Turnaround for Medical Equipment

Bovie IDS 400 Features

The Bovie IDS 400 has IDS technology gives the surgeon the flexibility to consistently choose the type of effect desired with maximum convenience and safety. The Bovie IDS Series are innovative electrosurgical generators with fully digital implementation for use in today’s modern OR and surgical outpatient center. The Bovie-IDS units are easy-to-handle yet capable of covering a whole spectrum of electrosurgical interventions. Monopolar and bipolar functions satisfy all surgical demands with maximum safety and a user-friendly interface. Bovie’s digital technology makes controlling the IDS Systems very simple for the OR team, allowing the surgeon to concentrate on what’s important – the operation and the patient.

BovieFDFS (Fast Digital Feedback System) - Digitally controlled CUT and COAG functions give a consistent clinical output.
BovieNEM (Neutral Electrode Monitoring)
BovieFCFS (First Come First Serve) Improved patient safety with the latest digital implementation.
BovieDED (Digital Error Detection)

Bovie IDS 400 Specifications

Dimensions

Height: 6.5 In (16.5 cm)
Width: 14.75 In (37.5 cm)
Depth: 18.1 In (46 cm)
Weight: < 20 lbs (< 9.07 kg)

General

Duty Cycle: 10 S / 30 S
Output Type: RF Isolated “F”
Output Frequency: 490 kHZ ± 5
Input Current: 4.5 A ~
Line Voltage: 100-240 V ~

Operating Parameters

Ambient temperature range 10° to 40° C
Relative humidity 30% to 75%, non-condensing
Atmospheric pressure 70kPa to 106kPa
Warm-up time If transported or stored at temperatures outside the operating temperature range, allow one hour for the generator to reach room temperature before use.

Transport and Storage

Ambient temperature range -40˚ to +70˚ C
Relative humidity 10% to 100%, including condensation
Atmospheric pressure 50kPa to 106kPa

Modes

Cut I

Output Power: 400 W @ 500Ω
Output Frequency: 490 kHz ± 4.9 kHz
Crest Factor at Rated Load: 1.6 ± 20%
VPeak Max: 1000V

Cut II

Output Power: 300 W @ 300Ω
Output Frequency: 490 kHz ± 4.9 kHz
Crest Factor at Rated Load: 1.6 ± 20%
VPeak Max: 625V

Blend (Max)

Output Power: 200 W @ 300Ω
Output Frequency: 490 kHz ± 4.9 kHz
Repetition Rate: 30 kHz ± 5 kHz
Crest Factor at Rated Load: 3.5 ± 20%
VPeak Max: 2000V

Pinpoint

Output Power: 120 W @ 500Ω
Output Frequency: 490 kHz ± 4.9 kHz
Repetition Rate: 30 kHz ± 5 kHz
Crest Factor at Rated Load: 4.5 ± 20%
VPeak Max: 2400V

Spray

Output Power: 80 W @ 500Ω
Output Frequency: 490 kHz ± 4.9 kHz
Repetition Rate: 30 kHz ± 5 kHz
Crest Factor at Rated Load: 6.5 ± 20%
VPeak Max: 4000V

Bipolar

Output Power: 120 W @ 150Ω
Output Frequency: 490 kHz ± 4.9 kHz
Crest Factor at Rated Load: 1.6 ± 20%
VPeak Max: 450V

Additional Features of the Bovie IDS 400

Cutting Edge
400 Watts of Cutting power.

Convenience
Ten (10) Doctor Presets for quick, uncomplicated setup between procedures

Versatility
Offers two (2) modes of Pure Cut, ten (10) modes of Blend, two (2) modes of Coagulation, Bipolar Coagulation and Bovie FCFS™ technology allowing the Doctor to move almost effortlessly from Monopolar to Bipolar during procedure.

Intelligence
The IDS-400 is designed with Bovie FDFS™ technology that calculates the impedance, 5,000 times per second, by sampling the current and voltage 5,000,000 times per second.

Security
The IDS-400 is designed with state-of-the-art safety features including Bovie NEM™ pad sensing technology which monitors the return electrode for optimum patient protection. Bovie DED™ monitors all functions of the generator to ensure constant safety for the patient, doctor and OR staff.

Key Features of the Bovie IDS-400

The Bovie® IDS-400 includes the latest technology. This unit offers unsurpassed performance, flexibility, reliability, and convenience. It includes the following features:

two cut modes, Cut I and Cut II
Two cut modes give the surgeon flexibility to cut all types of tissue without losing performance. Cut I generate constant output power over a wide range of impedances. Refer to Appendix A, Technical Specifications section of this guide.

Cut II is a softer cut that generates constant output power with a lower voltage over a small range of impedances suggested for laparoscopic procedures. Refer to Appendix A, Technical Specifications section of this guide.
Blend with 10 settings
The Blend mode is a combination of cutting and hemostasis. The IDS-400 gives the surgeon the freedom to adjust the desired level of hemostasis. A setting of 1 is minimal blend with maximum cutting effect. A setting of 10 is maximum hemostasis (blend) with minimal cutting effect. This adjustment is easily achieved by an incremental adjustment. Refer to Section 2, Controls, Indicators, and Receptacles, Cut and Blend Controls. The Blend mode improves the rate of targeted tissue desiccation without increasing the power delivered by the generator.
presets
The surgeon can store 10 user-defined presets for easy recall of frequently used settings.
Two Level of coagulation: Pinpoint and Spray
Pinpoint provides precise control of bleeding in localized areas.
Spray provides greater control of bleeding in highly vascular tissue over broad surface areas.

Questions about our electrosurgical units?

Soma Technology, Inc offers a wide range of electrosurgical units . If you have any questions about any of our electrosurgical units or need a quick quote, call 1-800-GET-SOMA and one of our knowledgeable sales representatives will help you.