Conmed System 2450 Features
Simple yet sophisticated perfectly describes System 2450 CONMED’s workhorse
electrosurgical generator. Providing state-of-the-art technology in an easy-to-use format,
the System 2450
is simple on the outside, yet sophisticated and powerful on the inside.
CONMED’ Dynamic Response technology delivers optimal clinical effects in all modes
through the continuous synchronization of voltage and current. Surgeons can choose from the
following modes to achieve the clinical effect desired.
- Dynamic Response Technology: The most advanced generator design available
- Continuous ARM safety monitoring
- Automatic programming restores System 2450 to the last settings used
- One hand switch/footswitch combination jack and a separate hand switch jack allow for multiple accessory connections
- Bovie-style footswitch connector incorporated into the monopolar hand switch/footswitch jack
- A serial interface port enables advanced communications between System 2450 and compatible robotic surgical systems or O.R. integration systems
- Integrated interface for activation of a smoke evacuator
- Front panel volume control
Conmed System 2450 Specifications
Dimensions
- Height: 7 in (18cm)
- Width:14.4 in (37 cm)
- Depth: 21.5 in (48 cm)
- Weight: 32 lb (14.5 kg)
Operation
- Intermittent 15 Sec on/30 Sec off.
Power Display Accuracy
- The greater of 2% of the maximum power setting for the selected mode or 15% of the selected power setting.
Line regulation
- Power Change < l %/V for the range of line voltages specified.
Environmental
- Operating Conditions: l0°C to 30°C, 95% RH Non-condensing maximum at altitudes from -60 meters to 3050 meters above mean sea level.
- Degree of protection against Ingress of Water: IPXl (Protection against vertically falling water drops).
- Mounting Restriction: 2-inch (5cm) clearance required on each side, back, and above the ESU for cooling. Cooling: Natural convection, conduction, and radiation.
- Storage Conditions: -34°C to 65°C, at altitudes from -60 to +4500 meters above mean sea level (1020.5hPa -577.l hPa) when sealed in an original polybag, packing material, and shipping carton.
- Before shipment or storage, the ESU should be enclosed and sealed in a polyethylene bag and placed inoriginal carton using original packaging materials.
- RF Leakage: <100 mA per 1EC60601-2-2: 1998, Clause 19.3.lOlb.
Audio
- Cut = 523 Hz
- Coag = 440 Hz
- Bipolar = 440 Hz
- Ace Fault = 847 Hz (pulsating)
- Dispersive Electrode Alarm = 847 Hz (pulsating)
- Err Fault = 847 Hz (pulsating)
- Increase Power Level = 3 79 Hz
- Decrease Power Level = 343 Hz
Power
- Power Output – Cut Mode: 1100V
- Power Output – Blend Mode: 1200V
- Power Output – Coagulation Mode: 3200V
- Power Output – Fulguration Mode: 5000V
- Power Output – Bipolar Mode: Micro -150V, Macro – 560V
General
- Output Control System: Dynamic Response
- Previous Setting Memory: Yes
- Contact Quality Monitoring System (CQM): ARM
- CQM Range: 10-150 Ohms
- Self Diagnosis: Yes
- Technology: Isolated RF Output
- Duty Cycle: 15 Seconds On, 30 Seconds Off
- Output configurations: Dynamic Response Technology
- Cooling method: Convection
Refurbished Conmed Conmed System 2450 Electrosurgical Unit
Soma Technology, Inc. offers Refurbished Conmed System 2450 Electrosurgical unit System up to 50% below OEM prices with the same service and warranty as new. The Conmed System 2450 Electrosurgical Unit is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts the Conmed System 2450 system is carefully inspected and tested by our in-house biomedical engineers who are highly skilled and certified to work on the Conmed System 2450 Electrosurgical Unit. If necessary, parts are replaced to ensure that all aspects of the pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Conmed system is working like new it undergoes a unique cosmetic restoration process. The ConMed System 2450 Electrosurgical Unit is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the infant warmer functions and looks like new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Conmed System, 2450 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Conmed System contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Conmed System 2450 Electrosurgical Unit System If you or your facility are looking to sell your Conmed System 2450, be sure to contact Soma Technology, Inc. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Conmed System 2450 Electrosurgical Unit System to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment, or looking to upgrade current equipment, contact Soma Technology’s purchasing department at [email protected] or send us a message on our Sell to Soma website.
