1.800.GET.SOMA (1.800.438.7662)

Bovie Aaron 2250

click on thumbnail to zoom

Other products by Bovie Aaron
Other products in Electrosurgical Units

Specifications

24 Hour Turn Around Time - The Fastest Turnaround for Medical Equipment

Bovie Aaron 2250 Features

The Aaron 2250 is a multipurpose electrosurgical generator for use in the modern operating room and surgicenter. It features both monopolar and bipolar functions to satisfy all of your surgical demands with safety, flexibility, reliability, and convenience. The 2250 Electrosurgical Generator is incorporated with automatic safety systems including self-test circuits, audible tones, discreet outputs, isolated circuitry, and Bovie NEM (neutral electrode monitoring).

Five output modes: Cut, Blend, Coagulation, Fulguration and Bipolar
Audible tones
Self-test circuits
Discreet output
Digital error correction
solated circuitry

Bovie Aaron 2250 Specifications

Dimensions and Weight

Width: 31.1 cm (12.3")
Height: 15.3 cm (6.0")
Depth: 41.3 cm (16.3")
Weight: < 8.8 kg (< 19 lbs.)

Output Power

Cut/Blend: 200 watts/200watts
Coagulation (Pinpoint): 120 watts
Fulguration (Spray): 80 watts
Bipolar: 80 watts

Line Voltage

100-240 VAC ± 10%

Frequency

Output Frequency: 490 kHz ± 5
Line Frequency: 50-60 Hz

Operating Parameters

Ambient temperature range 10° to 40° C (50° to 104° F)
Relative humidity 30% to 75%, non-condensing
Atmospheric pressure 700 to 1060 millibars
Warm-up time If transported or stored at temperatures outside the operating temperature range, allow one hour for the generator to reach room temperature before use.

Transport and Storage

Ambient temperature range -34˚ to 65˚ C (-29˚ to 149˚ F)
Relative humidity 0% to 75%, non-condensing
Atmospheric pressure 500 hPa to 1060 hPa

Input Power

Input Voltage 100-240 VAC
Mains line frequency range (nominal): 50 / 60 Hz
Power consumption: 500 VA
Fuses (two): 6.3 A (slow blow)

Additional Features of the Bovie Aaron 2250 Electrosurgical Generator

The Bovie Aaron 2250 is a multipurpose electrosurgical generator for use in the modern operating room and surgicenter. It features both monopolar and bipolar functions to satisfy all of your surgical demands with safety, flexibility, reliability, and convenience.

Why 200 Watts instead of 300?

Bovie's major goal in designing the Aaron 2250 Digital Electrosurgical Generator was to deliver the absolute highest level of safety and quality, but not waste money on features you rarely use. One major area of savings can be found in the output power of 200 watts.

Ten Cutting Blend Modes:

You don't have to settle for one or two blend modes anymore. With Bovie digital technology, you can choose from 10 different blend settings plus cut, all with 200 watts maximum power output for the most demanding procedures. These are clearly indicated by the LED blend indicator bar conveniently located adjacent to the blend button controls.

When no LED is lit, the Aaron 2250 delivers pure cutting power. As the "up" button is pushed the bar begins to illuminate. As the illumination advances from the bottom to the top, the degree of hemostasis will increase and cutting speed may decrease.

The unit remembers its last used settings; so when you turn the unit on, it performs a safety system check and automatically powers up to the last activated settings.

Coagulation Modes

The Aaron 2250 offers two levels of coagulation: coagulation (120 watts maximum power) and fulguration (80 watts maximum power), plus bipolar (80 watts maximum power).

Coagulation (pinpoint) provides precise control of bleeding in localized areas. Fulguration (spray) provides greater control of bleeding in highly vascular tissues over broad surface areas.

Questions about our electrosurgical units?

Soma Technology, Inc offers a wide range of electrosurgical units . If you have any questions about any of our electrosurgical units or need a quick quote, call 1-800-GET-SOMA and one of our knowledgeable sales representatives will help you.