Gaymar Medi-Therm II Features
The Gaymar Medi-Therm II machine provides a means of regulating patient temperature by supplying temperature-controlled water through a connector hose to a Gaymar Hyper/Hypothermia blanket. The blanket provides an interface for heating or cooling the patient. A patient probe senses the patient’s temperature, which is displayed on the control panel. The Medi-Therm II machine controls output water temperature by mixing hot and cold water using hot and cold solenoid valves under microcontroller control. A circulating pump, heater, and refrigeration unit are also utilized. Looking for other hyper/hypothermia systems? Or are you looking to compare an updated model like the Gaymar Medi-Therm III?
- Water inlets and outlets for two patient blankets
- Manual (blanket temperature) auto (patient temperature) and monitor set-up and operation modes
- Patient probe connector on the front of machine
- Digital display windows for the blanket, patient, and set point temperatures degrees C/degrees F toggle
- Alert lights for check water flow, check patient probe, add water flow, and remove from service – printed instructions above water fill lid
- 15 foot power cord
Gaymar Medi-Therm II Specifications
Dimensions
- Size: 94cm H x 35cm W x 48cm D
- Weight: 54.9 kg empty; 64.0 kg full
Physical Specifications
- Material: Aluminum Shell, 16 Gauge Steel Chassis
- Flow Rate: 1 liter per min. with H/H Blanket
- Power: 220V, 240V, 50Hz, 6A
- Temperature Settings: – Manual: 4 to 42°C – Automatic: 30 to 39°C
- Electrical Cord: 4.6m detachable power cord
