Axia STL4 Imaging Table

The Axia STL4 is a mobile imaging table which is intended to support a 500 pound patient. The Axia STL4 is sold new and is intended to be used with mobile x-ray systems for minimally invasive procedures. The STL4 is made in the USA and has 4 table movements. This table is available with 2 different style table tops; standard and cervical. The cervical top is 22 inches wide with a fully adjustable headrest.

• Easy c-arm access with diving board style table top.
• Large patient capacity up to 500 pounds.
• 2-inch thick mattress pad.
• Facial cutout for prone procedures.
• Easy patient transfer with low height.
• Available with a standard or cervical top.

Tabletop Dimensions

• Length: 84” (214.4 cm)
• Width: 24” (61cm)
• Thickness: 1.62" (4.1 cm)

Radiolucent Dimensions

• Length: 84” (142.2 cm)
• Width: 24” (61cm)

Table Dimensions

• Length: 86” (218.4 cm)
• Width: 26” (66 cm)

Weight

• Table Weight: 590lbs (268kg)
• Patient Capacity: 500lbs (227kg)

Table Movements

• Height: 30” to 40” (76.2 to 101.6 cm)
• Lateral Tilt: ( + / - ) 17º
• Trendelenburg: 13º
• Longitudinal Travel: 10” (+/- 5 ")

General

• Mattress Thickness: 2" (5 cm)
• Tabletop / Mattress Attenuation: 1.6mm Al.(+/-.2mm tolerance)
• Tabletop Material: Carbon fiber skin/foam core with integral facial cut-out
• Casters: 5" casters with full swivel and wheel lock
• Steel Base: I-shaped with epoxy finish
• Hand Control: Activates all motions

Power

• 120V/60HZ or 230V/50HZ
• Protect product from moisture
• Allowable Storage & Operating Humidity: 0-92%
• Allowable Storage Temperature: 32°F to 104°F (0°C to 40°C)
• Allowable Operating Temperature: up to 104°F (40°C)