GE Ohmeda IWS 3300 Features
The GE Ohmeda IWS 3300 is an infant warmer with cutting-edge technology and a microprocessor to provide accuracy and control. The system provides both manual and servo modes of operation. The Ohmeda 3300 evenly distributed the heat around the bed area. A Parabolic reflector helps focus the heat where it is needed. The 3300 is ideal for NICU and L& D rooms with its specific architectural details. With a heater head dovetail rails and integrated bed. These features allow for quick attach or detachment making it easy to maneuver the infant for procedures without disturbing the newborn.
The GE Infant Warming System (IWS) was designed to create a ration heat warmer for newborns that minimizes stimulation while supporting the developmental care of the infant. Providing a solution for all your thermoregulation needs. The Ohmeda IWS 3300 provides an easy-to-view digital display control panel – that allows you to change the baby’s thermal perimeters in 5% increments. The system alarms are set to provide you with an instant warning that the newborn’s temperature varies from the set control temperature.
- 5” (13 cm) casters with 2 front independent locking casters
- The heater assembly includes a rotating radiant heater, parabolic reflector, observation light, and visual alarm light.
- Control Unit used to operate the radiant heater and the observation light.
- Performs regular self-checks during operation including failure diagnostics
- Manual or Servo operation modes may be selected
- Alarms – alert the operator of low or high patient temperature, a skin temperature probe failure, a power failure, equipment (heat off) failure, or a check patient prompt.
- Integrated location beneath the patient surface for an X-ray cassette holder and tray
- Tiltable bed platform with one-hand operated hydraulics system for a dampened motion for Trendelenburg and Fowler positioning.
- Chest drainage hanger
- Integrated drawer storage
- Reusable skin temperature probe
GE Ohmeda IWS 3300 Specifications
Dimensions
- Height: 185 cm (73 in)
- Depth: 100 cm (39.5 in)
- Width: 62 cm (24.5 in)
- Weight: 95.2 kg (210 lb)
- Bed dimensions: 48.3 cm x 66 cm (19 in x 26 in)
- Bed tilting: ±10° Fowler and Trendelenburg, damped
Electrical
- Power requirements: 100 VAC
- 50/60 Hz models: 95 V ± 10%; 6.4 amps, 120 VAC
- 50/60 Hz models: 115 V ±10%; 5.7 amps. 220 VAC
- 50/60 Hz models: 220V ± 10%; 3.0 amps. 240 VAC
- 50/60 Hz models: 240 V ± 10%; 2.7 amps
- Nominal power consumption: 500 Watts at maximum
- Heater output: 440 Watts ± 5% at maximum % power setting
- Type: single CalRod
- Peak wavelength: 2.4 µ
- Line voltage compensation: input voltage is monitored and heat output is automatically adjusted to compensate for line voltage variation
- Chassis leakage current: less than 5 microamperes with ground wire intact; less than 95 microamperes with ground wire open
Controller
- Electronics: microprocessor-based control system. Self-test functions performed at power on and during normal operation
- Power control method: proportional heat control with zero voltage switching to minimize radiated and conducted
- EMI Examination light: nominal output: 100-foot candles at the center of the mattress. Estimated lamp life: 3,000 hours
- Temperature sensing system:
- range: 22° to 42°C
- Accuracy: ±0.3°C
- Resolution: ±0.1°C
- Probe interchangeability: ±0.1°C
Audible / Visual Alarms
- Audible tones: operator prompt tone. Alternating single tone. Alternating dual tone
- Overhead alarm light: large light mounted on the front of the heater module for easy visual identification
Refurbished GE Ohmeda IWS 3300 Infant Warmer
Soma Tech Intl offers the GE Ohmeda IWS 3300 Infant Warmers up to 50% below OEM prices with the same service and warranty as new. The GE Ohmeda IWS 3300 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the GE Ohmeda IWS 3300, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on infant warmers. If necessary, parts are replaced to make sure that all aspects of the GE Ohmeda IWS 3300 are to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the GE Ohmeda IWS 3300 is working like new it undergoes a special cosmetic restoration process. The GE Ohmeda IWS 3300 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the GE Ohmeda IWS 3300 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished GE Ohmeda IWS 3300 Infant warmers contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is actively looking to purchase a GE Ohmeda IWS 3300 If you or your facility is looking to sell your GE Ohmeda IWS 3300, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned GE Ohmeda IWS 3300 takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
