Medrad Spectris SHS 200

The Medrad Spectris SHS 200 MR injector is used for performing intravenous injections of MR contrast medium and common flushing solutions via the peripheral venous system with a Magnetic Resonance Imaging Scanner of up to 1.5 Tesla field strength magnet. The Spectris MR injection system is a flow-controlled system. The flow rate that is selected on the DCU is the flow rate at which the injector will deliver contrast for the duration of the injection.

• Injector head holds two disposable 63 ml front load syringes.
• Two manual adjustment knobs.
• Lighted indicators on the back of the injector head to display which syringe is armed or injecting.
• Injector head and stand weighs 37.5 lbs.

Dimensions

• Injector Head/Stand
• Height: 53.13” (135 cm)
• Width: 18.63” (47.3 cm)
• Depth: 18.63” (47.3 cm)
• Weight: 37.5 lbs (16.8 kg)
• HCU
• Height: 9.13” (23.2 cm)
• Width: 10” (25.4 cm)
• Depth: 12.63” (32 cm)
• Battery Pack
• Height: 2.38” (6 cm)
• Width: 9.25” (23.5 cm)
• Depth: 5” (12.7 cm)
• OTR
• Height: 1.5” (3.8 cm)
• Width: 4.5” (11.4 cm)
• Depth: 2” (5.1 cm)

Electrical Requirements

• VAC: 120-240 VAC
• Hz: 50/60 Hz
• VA: 250 VA

System Capabilities

• Syringe A: Disposable 63 ml
• Syringe B: Disposable 63 ml

Flow/Pressure

• Flow Rate: 0.1 - 10 ml/sec in 0.1 ml/sec increments
• KVO: 0.25 ml at 1 ml/sec every 30 seconds
• Volume: 1 - 63 ml in 1 ml increments
• Pressure Limit: Factory set at 300 PSI
• Delay: 00:00 sec - 59:59 min.

Fluid Delivery Performance

• Volume Range: 1 ml to 63 ml for syringe A or B; 1 ml increments
• Accuracy: Over a full injection + 1% of programmed volume and ±1 ml.
• Flow Rate Range: 0.1 to 10 ml/sec in 0.1 ml/sec increments
• Accuracy: ±10% of programmed volume and + 0.02 ml/sec during any non-pressure limited interval of stead flow