GE B125 Features
The GE B125 is one of the newest patient monitors from GE. The B125 monitor is known for its simplistic design, with its large 12-inch, captive touch screen. Making it easy for caregivers to interpret and modify patient data promptly. The large numerical or continuous waveforms and easy to see from any angle. The monitor comes standard with advanced parameter monitoring including ST-segment analysis, Full arrhythmia analysis, TruSignal SpO2, SuperSTAT NIBP, IBP, Respiratory rate, 3 or 5 Lead ECG, and EtCO2. The GE B125 can be a stand-alone monitor or it can be used along with other devices in a network.
- ST-Segment and full Arrhythmia analysis, SpO2, NIBP, IBP, RR, ECG, and EtCO2.
- Records and stores up to 168 hours of monitoring activities across all parameters.
- Analyses up to 16 types of arrhythmia including AFib.
- Three-hour battery life for optimal uninterrupted monitoring.
- A large numeric mode that enables critical parameter visibility even up to 13-feet away.
- 12.1″ Display
Ge B125 Specifications
Dimensions
- Height: 11 in (280 mm)
- Width: 12.5 in (317 mm)
- Depth: 5.9 in (150 mm)
- Weight: 9.5 lbs (4.3kg) (with battery)
Display
- Size: 12.1 in (diagonal)
- Resolution: 1280 x 800 pixels
- Number of waveforms: Up to 6
- Display layout and Color: User-configurable
- Controls: Capacitive Touch Screen & trim knob control and hand keys
ECG
- Leads available:
- 3 lead configurations: I, II, III
- 5 Lead configuration: I, II, III, aVR, aVf and V
- Sweep speed: 12.5, 25 or 50 mm/s
- Gain range: 0.5x, 1x, 2x and 4x
- Heart rate accuracy 30 to 300 bpm, ± 5% or ±5 bpm, whichever is greater
- Bandwidth: 50/60 Hz power supply
- Monitor: 0.5 to 40 Hz
- ST: 0.05 to 40 Hz
- Diagnostic: 0.05 to 145 Hz
- Pacemaker detection
- Range: 2 to 700 mV
- Pulse width: 0.5 to 2 ms
- ST-Aaegment Analysis
- Numeric Range:-9 to +9 mm (-0.9 to +0.9 mV)
- Accuracy: ± 0.2mm or ±10%, whichever is greater
- ST Trend: up to 168 h
- Impedance respiration: range adult – pediatric: 4 to 120 respiratory/min
- Impedance respiration: range neonate: 4 to 180 resp/min
SpO2
- GE Ohmeda SpO2
- Measurement range, Pulse Oximetry: 1 to 100%
- Pulse rate: 30 to 250 bpm
- Measurement accuracy – saturation
- Without Motion-Adult/Pediatric Finger sensor: 70 to 100% ± 2%
- Without Motion-Neonate: 70 to 100% ± 3%
- With Motion-Adult/Pediatric/Neonate: 70 to 100% ± 3%
- Low Perfusion-Adult/Pediatric: 70 to 100% ±3% (1~69% unspecified)
- Pulse rate: without motion: ± 2 bpm ( Adult/ Pediatric/ Neonate)
- Nellcor Oximax
- Measurement Range – Pulse Oximetry: 1 to 100%
- Pulse Rate: 20 to 250 bpm
- Measurement accuracy – saturation:
- Adult: 70 to 100% ±2%
- Neonatal: 70 to 100% ±3%
- Low Perfusion: 70 to 100% ±2% (0~69% unspecified)
- Pulse rate: 20 to 250 bpm
- Masimo
- Measurement Range – Pulse Oximetry: 1 to 100%
- Pulse Rate: 20 to 250 bpm
- Measurement accuracy – Saturation
- Without Motion-Adult/Pediatric: 70 to 100% ±2%
- Without Motion-Neonate: 70 to 100% ±3%
- With Motion-Adult/Pediatric/Neonate: 70 to 100% ±3%
- Low Perfusion: 70 to 100% ±2%(0~69% unspecified)
- Pulse Rate without motion: ±3 bpm
- Pulse rate with motion: ±5bpm
NIBP
- Measurement Technique: Oscillometric with step deflation
- Modes: Manual, automatic, and slat
- NIBP Measurement Range:
- Systolic Adult / Pediatric: 30 to 290 mmHg
- Systolic Neonates: 3 to 140 mmHg
- MAP Adult / Pediatric: 20 to 250 mmHg
- Diastolic adult / pediatric: 1o to 22 mmHg
- Diastolic neonate: 10 to 11o mmHg
- Default initial inflation pressure
- Adult / Pediatric: 135 ±15 mmHg
- Neonate: 100 ±15 mmHg
- Maximum Determination Time
- Adult/ Pediatric : 2m
- Neonate: 85 s
- Over Pressure Monitor
- Adult /Pediatric: 294 ±6 to 330 mmHg
- Neonate: 147 ±3 to 165 mmHg
Paper Recorder
- Method: Thermal dot array
- Horizontal Resolutions: 24 dots/mm (600 dpi)
- Vertical Resolution: 8 dots/mm (200 dpi)
- Waveforms Selectable: 1, 2, or 3 waveforms
- Numerics: HR, SpO2, NIBP, IBP1, IBP2, EtCO2/FiCO2, T1, T2, Resp
- Graphical Trend Printout: HR, ST, IBP1, IBP2, NIBP, SpO2, Pleth, CO2, Resp, T1+T2
- Paper width: 50 mm, printing width 48 mm
- Paper Speed: 6.25, 12.5, 25 mm/s
Operating Conditions
- Temperature: 5 to 40°C (41 to 104°F)
- Relative Humidity: 20 to 90% non-condensing
- Atmospheric Pressure: 700 to 1060 hPa (525 to 795 mmHg)
Storage and Transport Conditions
- Temperature: -20 to 60°C (-4 to 140°F)
- Relative Humidity: 10 to 90% non-condensing
- Atmospheric Pressure: 700 to 1060 hPa (525 to 795 mmHg)
Power Specifications
- AC Input: 100 to 240V ±10%, 50/60 Hz, 150VA
- Protection: Class I
- Battery: Exchangeable lithium-ion, 1 pcs max
- Charging Time: < 4 h to 90% capacity
- Run Time: > 3 h
Refurbished of The GE B125 Patient Monitor
Soma Tech Intl offers the GE B125 Patient Monitor up to 50% below OEM prices with the same service and warranty as new. The GE Monitor is not only technically refurbished but also cosmetically refurbished to make it work and look new. When the refurbishing process starts on the patient monitors, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on patient monitors. If necessary, parts are replaced to make sure that all aspects of the monitor are to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the B125 monitor is working like new it undergoes a special cosmetic restoration process. The monitor is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the GE B12 monitor is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished stretcher contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is actively looking to purchase GE patient monitors, If you or your facility is looking to sell your patient monitors, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Ge monitors takes out the middleman in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Techn Intl’s purchasing department at [email protected] or send us a message on our Sell to Soma website.
