Philips Agilent Viridia M3 Features
The Philips Agilent Viridia M3 Patient Monitor is a small, lightweight compact monitor that offers flexible monitoring to suit all your monitoring needs. The Monitor can be connected to the Philips M3000A Multi-Measurement Server. The color display of the Viridia M3 has a wide viewing angle, and excellent visibility from a distance. Making it easy to recognize and see the data that is needed for decision making. For applications where multiple or larger displays are required, additional displays can be connected to the monitor through a standard VGA output. The Philips Agilent Viridia M3 patient monitor was designed for use by clinicians for adult, pediatric and neonatal patients in critical and intensive care areas, Operating Rooms and General Wards, and for transport inside and outside the hospital.
- Portable
- Wireless
- Networked monitor
- EASI™-derived 12-lead ECG4 using a 5-electrode cable set
- Multi-lead Arrhythmia
- Up to 3 channels of ECG with basic Arrhythmia and ST Analysis capability
- FAST-SpO2 measurement, using Fourier Artifact Suppression Technology, for accurate performance even with low perfusion
- Respiration, Non-invasive and Invasive Blood Pressure, and Temperature measurements
- Mainstream or Sidestream CO2, a second Invasive Blood Pressure and Temperature measurements, and enhanced Arrhythmia capability, available optionally
Philips Agilent Viridia M3 Specifications
Dimensions
- Without Handle
-
- Width: 8.27 in ( 210 mm)
- Height :8.27in ( 210 mm)
- Depth: 5.31 in (135 mm)
- Weight: with out battery 7.05 lbs. (3200 g)
-
Electrical
- 100 to 240VAC, 50/60Hz,
- 0.4 to 0.7A
Display
- 6.5″ (diagonal) active color LCD (TFT)
- Resolution: 640 × 480 pixels
VGA Interface
- Refresh rate: 60 Hz.
- Horizontal frequency: 31.5 kHz
- Resolution: 640 x 480 pixels
- Video Signal: 0.7 Vpp @ 75 Ohm
- HSYNC/VSYNC signal type: TTL
- Connector: 15-pin D-SUB
Refurbished Philips Agilent Viridia M3 Patient Monitor
Soma Tech Intl offers the Philips Agilent Viridia M3 patient monitors
up to 50% below OEM prices with the same service and warranty as new. The Philips Agilent Viridia M3 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Philips Agilent Viridia M3system, it is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on patient monitors. If necessary, parts are replaced to make sure that all aspects of the Philips Agilent Viridia M3 to the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Philips Agilent Viridia M3 patient monitor is working like new it undergoes a special cosmetic restoration process. The Philips Agilent Viridia M3 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Philips Agilent Viridia M3 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Philips Agilent Viridia M3 patient monitors contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is actively looking to purchase a Philips Agilent Viridia M3 system. If you or your facility is looking to sell your Philips Agilent Viridia M3, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Philips Agilent Viridia M3 to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Techn Intl’s purchasing department at [email protected] or send us a message on our </a href=”https://www.somatechnology.com/Sell-to-Soma/” target=”_blank”>Sell to Soma website.
Soma Tech Intl offers a wide range of
patient monitors. If you have any questions about any of our patient monitors or need a quick quote, call 1-800-GET-SOMA and one of our
knowledgeable sales representatives will help you.
