GE AMX 4 Features
The GE AMX 4 is a portable X-ray machine that operates off a rechargeable battery. The GE AMX 4 X-ray is the predecessor to the GE AMX 4 Plus X-ray machine. The system is ideal for a variety of routine radiographic procedures, from intensive care, cardiac care, emergency rooms, operating rooms, orthopedics, clinics, pediatrics, and neonatal care.
- MX-75 275k HU X-ray tube with a .75mm focal spot
- GE AMX-IV collimator
- High-quality image
- Forward and reverse variable speed
- Completely mobile
- LED display
- Operates at full power with no power connection
- 24 kVp stations
- 30 mAs stations
- 100 mA constant
- kVp 50 – 125
- mAs 0.4 – 320
GE AMX 4 Specifications
Dimensions
- Height: 76 inches (1,930 mm)
- Width: 25-3/16 inches (640 mm)
- Depth: 45-3/8 inches (1,153 mm)
- Weight: 1,050 lb (477 kg)
Battery
- Nine 12.9-volt batteries connected in series provide approximately 116 volts at full charge. Battery capacity is approximately 20,000 mAs at 100 kVp when fully charged and under specific conditions. Actual mAs capacity depends on the condition of the batteries, use of collimator lamp, electric brakes, rotor, and distance driven.
Movements
- (tube vertical movement measured at the focal spot)
- Range: At least 52.5” (1,334 mm)
- Lowest position: 26.1” (663 mm) maximum from floor
- Highest position: 78.6” (1,996 mm) minimum from floor
- Horizontal movement measured at focal spot relative to column face: 24” (610 mm) minimum to 40” (1,016 mm) maximum
- Tube column rotation measured from horizontal latch: 360°
- Tube and yoke rotation around horizontal arm measured from tube port down position: Range (360°), detent locations (0, ±90°, ±180°)
- Tube trunion rotation measured from tube port down position: Range (120°), forward (110°), backward (10°), detent (0°, 90°)
- Collimator rotation measured from the front of the collimator with the tube port facing down: Range (180°), right (90°), left (90°), detent (0°, 90°)
- Drive Speeds
- Speed 1: Drive speed with horizontal arm secured for support – 264’ (6,705 mm) per minute ±25%
Reproducibility
- Speed 1: Drive speed with horizontal arm secured for support – 264’ (6,705 mm) per minute ±25%
- Speed 2: Maneuvering speed with horizontal tube arm removed from the transport latch – (30% to 60% of drive speed)
- Drive speed is measured on a smooth, hard, and level surface. Speed will be reduced by inclines, carpeted, or soft surfaces
Collimator
- The minimum source-to-skin distance is limited to more than 30 cm by the skin spacers at the beam exit of the collimator. Full 17” × 17” (43 cm x 43 cm) radiographic coverage at 40” (1.02 mm) source to image distance. Minimum inherent filtration of 2.0 mm aluminum equivalent at 100 kVp
Light Filed Intensity
- The average illumination at a distance of 100 cm (39.37”) from the focal spot shall be 16-foot candles (170 lux) or more
Refurbished The GE AMX 4 Portable X-Ray Machine
Soma Tech Intl offers the GE AMX 4 Portable X-Ray System up to 50% below OEM prices with the same service and warranty as new. The AMX 4 is technically refurbished and cosmetically refurbished to make it work and look new. When the refurbishing process starts on the X-Ray, it is carefully inspected and tested by our in-house biomedical engineers who are highly skilled and certified to work on X-Ray systems. If necessary, parts are replaced to make sure that all aspects of the GE are to the original engineering manufacturer’s specifications. This ensures that the unit works the same way it originally left the manufacturer. After the X-ray system is working like new it undergoes a special cosmetic restoration process. The X-ray machine is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment they sell. Before the GE X-ray machine is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished GE X-ray machine contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is actively looking to purchase a GE X-ray system, If you or your facility is looking to sell your X-ray machine, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned X-ray machines takes out the middleman in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also allows trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Tech Intl’s purchasing department at [email protected] or send us a message on our Sell to Soma website.
