CMP DSW3AE (Table Top Cabinet) Blanket Warmer Features
The Warming Cabinet contains a microprocessor control system with a digital display. Components shall include thermostatic temperature control, lighted rocker arm power switch, 15 amp circuit breaker protection, heat indicating lamp, continuous air circulating fan, Fahrenheit/Celsius conversion button, 180-degree hi-limit cut-off thermostat for over-temperature protection with red warning lamp and audible alarm buzzer. All operating controls and indicators shall be functional and visible from the exterior of the cabinet. All temperature settings and limits can be customized utilizing the buttons on the front control panel. Users can adjust limit alarm setpoint, delta alarm setpoint, low range setpoint and high range setpoint. A lockout feature is standard and can be enabled to prevent any adjustments to the current settings. An optional USB port can be provided on the front control panel for easy access to temperature history data utilizing a USB flash drive.
- Stainless Steel Construction
- Electric Heated Compartments
- Microprocessor Control System
- 80 – 180°F Temperature Range
- U.L. Listed
- Separately Controlled Chambers
CMP DSW3AE (Table Top Cabinet) Blanket Warmer Specifications
Dimensions
- Single Compartment Heat
- 30” wide x 21” or 27” deep x 26” high (outside dimensions)
- 3.39 cu. ft. (21” deep) & 4.71 cu. ft. (27” deep)
- Available 18” or 24” wide x 21” deep x 26” high
- 1.86 cu. ft. (18” wide) & 2.63 cu. ft. (24” wide)
Refurbished CMP DSW3AE Blanket Warmer
Soma Tech Intl offers CMP DSW3AE Blanket Warmerup to 50% below OEM prices with the same service and warranty as new. The CMP DSW3AE Blanket Warmer is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the CMP DSW3AE Blanket Warmer, it is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on blanket warmers. If necessary, parts are replaced to make sure that all aspects of the CMP DSW3AE is functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the CMP DSW3AE is working like new it undergoes a special cosmetic restoration process. The CMP DSW3AE is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the CMP DSW3AE is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished CMP DSW3AE contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a CMP DSW3AE. If you or your facility is looking to sell your CMP DSW3AE , be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned CMP DSW3AE to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Techn Intl’s purchasing department at [email protected] or send us a message on our Sell to Soma website.
