1.800.GET.SOMA (1.800.438.7662)

Stryker Smart Pump

click on thumbnail to zoom

Other products by Stryker
Other products in Tourniquets

Specifications

Stryker Smart Pump Features

The Stryker SmartPump is a dual-channel tourniquet pump. It is designed for use by qualified medical personnel to temporarily impede blood flow in a patient’s extremity in order to create a blood-free surgical zone. Its dual-channel design supports single cuff, bilateral, and Bier Block procedures, and allows for simultaneous surgery of both an upper and lower limb. Each cuff’s unique pressure and time settings are displayed, controlled, and monitored independently. The SmartPump uses single port cuffs.

The procedure timer and cuff target pressure may be set using simple, intuitive steps. Control buttons are clearly identified.
Inflation is initiated by pressing the Inflate button.
Deflation is initiated by pressing and holding the Deflate button for 1.5 seconds.
The large, bright, backlit LCD display shows total elapsed cuff inflation time and cuff pressure (mmHg). The displayed time format is user selectable: minutes or hours and minutes.

Stryker Smart Pump Specifications

Dimensions

Height: 15.5 In (39.4 cm)
Width: 10 In (25.4 cm)
Depth: 9 In (22.9 cm)
Weight: 12 lb (5.45 kg)

Power Sources

AC Input: 100 - 240 VAC 50/60 Hz universal switching power supply
Automatic internal battery switchover for AC–free use or AC loss protection
Facility power: 120 VAC, 10A, hospital grade receptacle

AC Input

Input voltage range: 100 – 240 VAC
Frequency: 50/60 Hz
AC fuses: 3.15A / 250V
Power requirements: 1.5 A @ 120 VAC

Internal DC Supply Module

Output voltage: 15 VDC ± 1%, 150 mV pk-pk ripple
Output current: 4A maximum
Output power: 60 W maximum
Overload protection: Short circuit, 110% - 150% auto recovery
Over voltage protection: 115% - 130% of rated output voltage

Internal Battery

Type: Nickel metal hydride (NiMH)
Nominal voltage: 12 VDC
Rated capacity: 2.6 Ahr
Over current protection: Integral PTC fuse
Over temperature sense: Integral thermistor
Charge time: 1 hour (80% charge), 6 hours (full charge)
Power conservation: 30 days (fully charged, then unplugged)

Display

Type: High-resolution backlit custom LCD
Timer: Elapsed time numeric
Pressure: Real-time digital numeric with graphic pressure gauge

Air Pump

Nominal power: 12 VDC, 1.25 A
Flow: 10 LPM open flow

Pressure Transducers

Operating pressure: 0 – 15 psi
Maximum pressure: 30 psi
Repeatability: ± 0.2% FS typical

Cuff Pressure

Accuracy: ± 2% or 4 mmHg, whichever is greater, set pressure value
Range: 100 to 475 mmHg

Cuff Timer

Range: 1 to 240 minutes
Adjustment: 1 to 15 minutes – 1 minute increments; 15 to 240 minutes – 5 minute increments