Philips HeartStart FR2

Quotes in less than 24 hours Download Specifications

Philips HeartStart FR2 Features

The Philips Heartstart FR2 Is a battery-powered lightweight AED. The HeartStart FR2 has a simple design, with only two buttons, an on/off button at the top and a shock button at the bottom. The Display screen on the automated external defibrillator provides text prompts and information on the patient. The Philips Heartstart FR2 additionally offers the patient’s ECG reading on the display screen. The Heartstart Fr2 was designed specifically for first responders in an emergency for adult patients. The Philips electrode pads can detect heart rhythm to determine if a shock is needed. The Philips Heartstart FR2 can deliver up to 150 joules of energy through a shock. Philips offers a variety of AEDS. The Heartstart FR Line of AEDs includes The Philips Heartstart FR2+.

  • Portable, light AED.
  • Easy-to-use design and superior technology.
  • Automatically perform self-tests, which results in very little maintenance.
  • Internal memory stores summaries of information from incidents.
  • Non-rechargeable lithium battery.
  • Adult and infant/child pads.
  • Small and light design.
  • LCD Screen.
  • SMART biphasic waveform.
  • SMART Analysis – Analyze a patient’s ECG and determine whether a shock should be delivered.


Philips Heartstart FR2 Features


  • Height: 2.6 in. (6.6 cm)
  • Width: 8.6 in. (21.8 cm)
  • Depth: 8.6 in. (21.8 cm)
  • Weight (With battery): 4.7 lbs (2.1 kg)


  • 12 VDC 4.2 Ah, lithium manganese dioxide
  • Disposable, recyclable, long-life, primary cell
  • Capacity: 300 shocks or 12 hours of operating time
  • Shelf-Life: 5 Years


  • High-resolution backlight LCD
  • Height: 2.3 in. (5.8 cm)
  • Width: 2.8 in. (7 cm)


  • Waveform: Biphasic truncated exponential. Waveform parameters are automatically adjusted as a function of patient defibrillation impedance.
  • Energy: Using adult defibrillator pads: 150 J nominal (±15%) into a 50 ohm load. Using infant/child reduced-energy defibrillator pads: 50 J nominal (±15%) into a 50-ohm load.
  • Charge Control: Controlled by Patient Analysis System for automated operation.
  • Charge Time: Typically less than 10 seconds. Charge time increases at the end of battery life.

ECG Display

  • Monitored Lead: ECG information is received from adult defibrillator pads in the anterior-anterior (Lead II) position or from FR2 infant/child reduced-energy defibrillator pads in the anterior-posterior position.
  • Frequency Response (Bandwidth): Nondiagnostic rhythm monitor 1 Hz to 20 Hz (-3 dB), nominal.
  • Sensitivity: 1.16 cm/mV, nominal.
  • Heart Rate: 30 to 300 bpm, updated each analysis period.

Data Card

  • Capacity: 8 hours of an event and ECG data, or 60 minutes with voice recording.

Environmental Data

  • Operating Temperature: 32° F to 122 °F (0° C to 50° C)
  • Operating Humidity: 0% to 95% RH (Relative Humidity)
  • Standby Temperature: 32° F to 109° F (0° C to 43° C)
  • Standby Humidity: 0% to 75% RH

ECG Analysis System

  • Function: Evaluate the impedance of defibrillation pads for proper contact with patient skin, and evaluate the ECG rhythm and signal quality to determine if a shock is appropriate.
  • Protocols: Follows pre-programmed settings to match local EMS guidelines or medical protocols. The settings can be modified using the setup options.
  • Shockable Rhythms: Ventricular fibrillation (VF) and certain ventricular tachycardias, including ventricular flutter and polymorphic ventricular tachycardia (VT). The HeartStart AED uses multiple parameters to determine if a rhythm is shockable.
  • Asystole: On detection of asystole, provide a CPR prompt at the programmed interval.
  • Pacemaker Detection: On detection of a pacemaker (in advanced mode or with M3848A ECG display cable), provides a screen display of PACEMAKER DETECTED alert, and M3860A includes pacemaker artifact in ECG display. In both models, the pacemaker artifact is removed from the signal for rhythm analysis.
  • Artifact Detection: If electrical “noise” (artifact) is detected that interferes with accurate rhythm analysis, the analysis will be delayed until the ECG signal is clean.
  • Analysis Protocol: Depending on the results of the analysis, either prepare for shock delivery or provide a pause.

Refurbished Philips Heartstart FR2

Soma Tech Intl offers Refurbished Philips Heartstart up to 50% below OEM prices with the same service and warranty as new. The Philips Heartstart FR2 is not only technically refurbished but also cosmetically refurbished to make it work and look new. When the refurbishing process starts on the AED, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on Philips Heartstart FR2 AED. If necessary, parts are replaced to make sure that all aspects of the AED are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the AED System is working like new it undergoes a special cosmetic restoration process. The Philips AED is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Philips Heartstart FR2 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Philips Heartstart FR2 AED contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a Philips Heartstart FR2 If you or your facility is looking to sell your AED, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Philips Heartstart FR2 AED to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!


Questions about our AEDs?

Soma Tech Intl offers a wide range of AEDs. If you have any questions about our automatic external defibrillators or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your AEDs? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us