GE Datex Ohmeda Aestiva 5

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

GE Datex Ohmeda Aestiva 5 Features

The GE Datex Ohmeda Aestiva 5 is an anesthesia machine with an integrated breathing circuit, which can provide intensive care ventilation. The Aestia 5 is a flexible system, allowing you to customize the anesthesia and ventilation flow. The machine comes in two options for ventilation, the 7100 or the 7900 SmartVent giving you a higher level of control. The anesthesia machine can safely produce low-flow anesthesia and can reduce the number of anesthetic agents. This allows the system to provide consistent delivery of measurements such as tidal volume and gas flow. The Datex Ohmeda system additionally offers a few varieties of vaporizer configurations ranging from two or three connections. The anesthesia machine also comes in a compact version, Aestiva 5 Compact, and a version for MRI Use, the Aestiva 5 MRI. The Aestiva 5 allows for a wide range of ventilation for patients from pediatrics to adults. The GE Datex Ohmeda Anesthesia 5.

  • Advanced breathing system with ventilation
  • Ventilation options: 7100 and 7900 SmartVent
  • 2 or 3 vaporizer configurations
  • Optional Vaporizers: Tec 5, Tec, 6, Tec 7
  • Customizable drawers and shelves
  • Dual Air Flow tube for low-flow
  • Built-in machine diagnostics

GE Datex Ohmeda Aestiva 5 Specifications

Dimensions (2 Vaporizers)

  • Height: 53.4” (135.8 cm)
  • Width: 29.5” (75 cm)
  • Depth: 32.7” (83 cm)
  • Weight: 300 lb (136 kg)

Dimensions (3 Vaporizers)

  • Height: 53.4” (135.8 cm)
  • Width: 36.6” (93 cm)
  • Depth: 32.7” (83 cm)
  • Weight: 340 lb (154 kg)

Work Surface

  • Height: 34.5” (87.5 cm)
  • Width: 18.5” (47 cm)
  • Depth: 12.4” (31.5 cm)

Modes of Ventilation

  • Volume Control Mode: With tidal volume compensation
  • Pressure Mode: (optional)

Ventilation Parameters

  • Tidal volume range: 45 to 1500 mL
  • Incremental Settings: 45 to 100 mL (increments of 5 mL); 100 to 300 mL (increments of 10 mL); 300 to 1000 mL (increments of 25 mL); 1000 to 1500 mL (increments of 50 mL)
  • Pressure (PInspired) Range: 5 to 50 cm H2O (increments of 1 cm H2O) (Pressure mode)
  • Rate: 4 to 65 breaths per minute (increments of 1 breath per minute)
  • Inspiratory/expiratory Ratio: 2:1 to 1:6 (increments of 0.5)
  • Inspiratory Pause Adjust: 5% to 60% of the inspiratory time (increments of 5%)

Positive End Expiratory Pressure (PEEP)

  • Type: Integrated, electronically controlled
  • Range: OFF, 4 to 30 cm H2O (increments of 1 cm H2O)

Ventilator Monitored Values

  • Tidal volume: 5 to 1500 mL, 1 mL resolution
  • Minute volume: 0 to 99.9 L/min, 0.1 L/min resolution
  • Breathing rate: 0 to 65 breaths per minute, 1 breath per minute resolution
  • Oxygen Percentage: 5% to 110%, 1% resolution
  • Airway pressure: –9 to 99 cm H2O, 1 cm H2O resolution

Delivery/Monitoring Accuracy

  • Volume delivery: > 200 mL = better than ±10% Set TV; 75 to 200 mL = better than ±20 mL; < 75 mL = better than ±15 mL
  • Pressure (PInspired) Delivery Repeatability: ±2 cm H2O
  • PEEP Delivery Repeatability: ±2 cm H2O
  • Volume Monitoring: > 200 mL = better than ±10%; 75 to 200 mL = better than ±20 mL; < 75 mL = better than ±15 mL
  • Pressure Monitoring: Better than ±2 cm H2O or ±5% of reading (whichever is greater)

Delivery

  • Vaporizers: Tec 5, Tec 6 Plus, Tec 7
  • Number of Positions: 2 or 3
  • Mounting: Tool-free installation Selectatec manifold interlocks and isolates vaporizers

Ventilator Pneumatics

  • Pressure Range at Inlet: 240 kPa to 700 kPa/35 psig to 100 psig
  • Peak Gas Flow: 70 L/min + fresh gas flow
  • Flow range: 2 to 70 L/min
  • Flow Compensation Range: 200 mL/min to 15 L/min

Battery Back-up

  • Backup power: Demonstrated battery time under typical operating
    conditions are 90+ minutes when fully charged. Battery time under extreme conditions is 30 minutes.
  • Battery type: Internal rechargeable sealed lead acid

Refurbished GE Datex Ohmeda Aestiva 5 Anesthesia Machine

Soma Tech Intl offers GE Datex Ohmeda Aestiva 5 Anesthesia Machine up to 50% below OEM prices with the same service and warranty as new. The Datex Ohmeda Aestiva 5 is technically refurbished and cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the GE Aestive 5, it is carefully inspected and tested by our in-house biomedical engineers, who are highly skilled and certified to work on anesthesia machines. If necessary, parts are replaced to make sure that all aspects of the anesthesia machine are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the anesthesia machine is working like new, it undergoes a special cosmetic restoration process. The Datex Ohmeda Aestiva 5 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment they sell. Before the GE anesthesia machine, Aestiva 5 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Datex Ohmeda Aestiva 5 contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a GE Datex Ohmeda Aestiva 5. If you or your facility is looking to sell your Anesthesia Machine, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned GE Datex Ohmeda Aestiva 5 to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!

 

Banner

Questions about our Anesthesia Machines?

Soma Tech Intl offers a wide range of anesthesia machines. If you have any questions about any of our anesthesia equipment or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your anesthesia machines? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us