ENGLISH 
Español
3M Steri-Vac Sterilizer / Aerator GS5-1D
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications
3M Steri-Vac Sterilizer / Aerator GS5-1D Features
The 3M Steri-Vac GS5-1D is an advanced gas sterilization system that provides efficient and reliable medical instruments and device sterilization. Utilizing ethylene oxide (EO) gas ensures thorough sterilization while maintaining the integrity of sensitive materials.
- Effective Sterilization: Utilizes ethylene oxide (EO) gas to effectively sterilize a wide range of medical instruments and devices.
- User-Friendly Interface: Features an intuitive control panel with clear displays and programmable cycles.
- Flexible Cycle Options: Offers multiple cycle options to accommodate different types of loads and sterilization needs.
- Safety and Compliance: Equipped with advanced safety features such as automatic leak detection, EO concentration monitoring, and compliance with regulatory standards.
- Gas Management: Includes an efficient gas handling system to minimize EO gas usage and reduce emissions.
- Gas Cartridge System: Utilizes a single-use, 3M™ Steri-Gas™ Cartridge (100% EO) that is punctured only when the chamber door is sealed and the proper vacuum is drawn, ensuring that gas remains safely inside the chamber.
- Durable and Reliable: Constructed with high-quality materials and components to ensure durability and consistent performance.
3M Steri-Vac Sterilizer / Aerator GS5-1D Specifications
Dimensions
Shipping Weight: 200 kg (440 lbs.)
Operational Weight: 127 kg (281 lbs.)
Crate Dimensions
- Height: 37.75 In (96 cm)
- Width: 38.625 In (99 cm)
- Depth: 44.875 In (114 cm)
Exterior Dimensions
- Height: 27.9 In (71 cm)
- Width: 30.0 In (76 cm)
- Depth: 37.4 In (95 cm)
Sterilization Chamber
Volume: 136 L (4.8 ft3)
- Height: 15 In (38 cm)
- Width: 17 In (43 cm)
- Depth: 32 In (83 cm)
Sound
Sound Levels: The average decibel level of an active sterilizer is <60 dBA**
Power
Line Voltage: 200–240 VAC
Line Frequency: 50/60 Hz
Phase: Single
Line Current: 15 amp dedicated circuit
Heat Load: 5,500 Btu/hr
Current Load: 10 amp
Environmental
Altitude: 2,500 M (maximum)
Operating Temperature: 15–35ºC (59–95ºF)
Humidity: 20–80% relative humidity (non-condensing)
Room Air Exchanges: 10 per hour (minimum)
Minimum Room Size: 30 m3 (1,000 ft3)
Compressed air specs
Pressure: 7.0 kg/cm2 (100 psig) minimum to 10.5 kg/cm2 (150 psig) maximum
Flow Rate: 2.2 liters per second at 5.3 kg/cm2 (4.7cubic feet per minute at 75 psig) per sterilizer, 100% duty cycle compressor
Quality: Clean air supply with a maximum allowable dirt particle size of 0.5 microns and free of oil
Moisture Content: Less than 10°C (50°F) dew point
Required service access
Minimum distance from rear wall: 10.2 cm (4 In)
Minimum access on both sides and top: 20 In (20 cm)
Service Footprint
- Height: 27.5 In (70 cm)
- Width: 30.0 In (76 cm)
- Depth: 35 In (89 cm)
Refurbished 3M Steri-Vac Sterilizer/Aerator GS5 Series Sterilizer
Soma Tech Intl offers the 3M Steri-Vac Sterilizer/Aerator GS5 Series Sterilizer up to 50% below OEM prices with the same service and warranty as new. Soma technically and cosmetically refurbishes these sterilizers back to the original engineering manufacturer’s specifications. Using highly skilled, trained, and certified in-house biomedical engineers these units are fully tested, disassembled, and if necessary, parts are replaced. Once all the parts of the 3M Steri-Vac GS5 Series are in working order, the sterilizer is calibrated back to OEM specifications, to make sure it works exactly the way it did when it originally left the manufacturer. Soma Tech Intl not only refurbished the product, but each unit also goes through a Special cosmetic restoration process. The 3M Steri-Vac Sterilizer/Aerator GS5 Series Sterilizer is cleaned and minor scratches and dentures are repaired, and decals are replaced if necessary.
Soma Tech Intl also purchases used and pre-owned sterilizers. If you or your facility wants to sell your 3M Steri-Vac GS5 Series, Soma Tech Intl has an experienced purchasing department that makes the process headache and hassle-free. When selling your sterilizer to Soma, there is no need for a middle man, it is a direct transaction to Soma which ensures that you get top dollar for your medical equipment. Soma Tech Intl not only buys sterilizers but a wide variety of different medical equipment as well if your medical facility is looking to free up space. If you have medical equipment you would like to sell to Soma, send us a message here!
